Combined finite element-charge simulation computation of monopolarcorona on bundle wires
In this paper, the corona current and hence the corona power loss associated with bundle wires is estimated by a combined iterative computational technique based on the finite element (FE) and charge simulation (CS) methods. The investigated bundled transmission lines consist of one-, two-, and thre...
محفوظ في:
| المؤلف الرئيسي: | |
|---|---|
| مؤلفون آخرون: | |
| التنسيق: | article |
| منشور في: |
1998
|
| الموضوعات: | |
| الوصول للمادة أونلاين: | https://eprints.kfupm.edu.sa/id/eprint/14584/1/14584_1.pdf https://eprints.kfupm.edu.sa/id/eprint/14584/2/14584_2.doc |
| الوسوم: |
إضافة وسم
لا توجد وسوم, كن أول من يضع وسما على هذه التسجيلة!
|
| الملخص: | In this paper, the corona current and hence the corona power loss associated with bundle wires is estimated by a combined iterative computational technique based on the finite element (FE) and charge simulation (CS) methods. The investigated bundled transmission lines consist of one-, two-, and three-wires. Variation of the corona power loss as a function of the number of wires, wires orientation as well as the bundle spacing is investigated. The contribution of each bundle wire to the total corona power loss is also reported. A laboratory model was built to investigate the effectiveness of the new iterative technique. It has been found that the results agreed well with the experimental values |
|---|