Magnesium-reinforced PMMA composite scaffolds: Synthesis, characterization, and 3D printing <i>via</i> stereolithography حسب Ambreen Afridi (22224310)

"…Notably, pure PMMA exhibited the highest tensile strength, 26.23 ± 0.14 MPa and an elastic modulus of 707.81 MPa, while PMMA resin/1% Mg showed the lowest strength (19.46 ± 0.25 MPa) and modulus (392.88 MPa), indicating a decrease in mechanical integrity with higher Mg content. …"

Insights Into SARS-CoV-2 S1-RBD-ACE2 Interaction Using Computational Tools and Membrane Microarray Platform حسب Angelin Mary Philip (21547421)

Use of Carbide Derived Carbon in Water Treatment and Thermal Fluids Applications حسب Ismail W. Almanassra (14151321)

Engineering the Surface and Mechanical Properties of Water Desalination Membranes Using Ultralong Carbon Nanotubes حسب Yehia M. Manawi (18091207)

"…More pronounced effect on membrane’s mechanical properties was observed due to compatibility of CNTs with PS matrix when compared to other factors (i.e., changes in the CNT aspect ratio). The water contact angle for PS membranes incorporated with commercial CNT sharply decreased from 73° to 53° (membrane hydrophilization) for membranes with 0.1 and 1.0 wt. % of CNTs, while for the same loading of produced CNTs the water contact angles for the membrane samples increased from 66° to 72°. …"

Genetic Deletion of DNAJB3 Using CRISPR-Cas9, Produced Discordant Phenotypes حسب Shadi Nejat (19457212)

"…We hypothesized that mice lacking DNAJB3 would be more prone to high-fat (HF)-diet-induced increase in body weight and body fat, inflammation, glucose intolerance and insulin resistance as compared with wild-type (WT) littermates. Three DNAJB3 knockout (KO) lines were generated (KO 30, 44 and 47), using CRISPR-Cas9. …"

Enhancing the corrosion resistance of reinforcing steel under aggressive operational conditions using behentrimonium chloride حسب A. Bahgat Radwan (9631720)

"…Using only a 50 μmol L⁻¹ of BTC, we are able to measure an inhibition efficiency of 91, 79, and 71% in SCP solution with 3.5% NaCl at pH of 12.5, 10 and 7, respectively without showing any effect on the mechanical properties on the cured mortars. …"

Investigating the Role of FOXA2 Transcription Factor in Adipogenesis Using Human-Induced Pluripotent Stem Cells حسب Hafsa Madni (22674428)

"…Therefore, in this study, we aimed to investigate the role of <i>FOXA2</i> in adipogenesis using previously established wild-type induced pluripotent stem cells (WT-iPSCs) and <i>FOXA2</i> knockout iPSCs (FOXA2 KO iPSCs). …"

Enhanced thermoelectric properties of Bi₂Te_2.55Se_0.45 nanocomposites using eco-friendly Eocene Midra Shale palygorskite nanofillers: A sustainable... حسب Farah M. El-Makaty (14157090)

"…Different wt% of EMS (0.025, 0.05, 0.1, 0.5, and 1) were considered. …"

Impact of aluminium acetate particles size on the gelation kinetics of polyacrylamide‐based gels: Rheological and molecular simulation study حسب Ahmed Hamza (7224470)

"…The addition of bentonite at low crosslinker concentrations (0.5–1 wt.%) did not decrease the gel strength of 7 wt.% PAM/1 wt.% AlAc significantly. …"

Corrosion Evaluation of 316L Stainless Steel Exposed to CNT-Water Nanofluid حسب Dana Abdeen (18147583)

"…The electrochemical testing was performed at different CNTs loadings of 0.05, 0.1, 0.3 and 0.5 wt.% that were suspended in deionized water using the surfactant Gum Arabic (GA). …"

Stability and thermophysical properties test of carbide-derived carbon thermal fluid; a comparison between functionalized and emulsified suspensions حسب Ismail W. Almanassra (14151321)

"…The results demonstrated that the thermal conductivity enhancement was independent of temperature, decreases with gum-Arabic concentration, and significantly enhanced with CDC loading with a maximum enhancement of 26.1% for 0.3 wt% functionalized CDC. …"

SARS‐CoV‐2 infection triggers more potent antibody‐dependent cellular cytotoxicity (ADCC) responses than mRNA‐, vector‐, and inactivated virus‐based COVID‐19 vaccines حسب Hadeel T. Zedan (12535521)

"…We analyzed ADCC activity targeting SARS‐CoV‐2 spike (S) and nucleocapsid (N) proteins in convalescent sera following WT SARS‐CoV‐2‐infection (<i>n</i> = 91), including symptomatic and asymptomatic infections, omicron‐infection (<i>n</i> = 8), COVID‐19 vaccination with messenger RNA‐ (mRNA)‐ (BNT162b2 or mRNA‐1273, <i>n</i> = 77), adenovirus vector‐ (<i>n</i> = 41), and inactivated virus‐ (<i>n</i> = 46) based vaccines, as well as post‐mRNA vaccination BTI caused by omicron (<i>n</i> = 28). …"

Effect of Surface Treatment of Halloysite Nanotubes (HNTs) on the Kinetics of Epoxy Resin Cure with Amines حسب Vahideh Akbari (18768001)

"…Nonisothermal differential scanning calorimetry (DSC) analyses were performed on epoxy nanocomposites containing 0.1 wt.% of P-HNT, A-HNT, and F-HNT. Quantitative analysis of the cure kinetics of epoxy/amine system made by isoconversional Kissinger–Akahira–Sunose (<i>KAS</i>) and <i>Friedman</i> methods made possible calculation of the activation energy (<i>E</i>_α) as a function of conversion (α). …"

Investigation of the Effect of Imatinib and Hydroxyurea Combination Therapy on Hematological Parameters and Gene Expression in Chronic Myeloid Leukemia (CML) Patients حسب Esraa K. Al-Amleh (16023071)

"…Platelet counts, on the other hand, dramatically decreased in both IM and (HU + IM).</p><h3>Conclusion</h3><p dir="ltr">Because the studied genes (BCL2, PP2A, CIP2A, and WT1) are participating in cell proliferation and death, the findings show that the examined genes are significant to understand the efficacy of various therapies. …"

Effect of surfactants on the convective heat transfer and pressure drop characteristics of ZnO/DIW nanofluids: An experimental study حسب Adnan Qamar (14421759)

"…Convective heat transfer (HTC) and flow characteristics (pressure drop (ΔP) and friction factor (f)) of aqueous ZnO NFs' within a circular mini tube (D i = 1.0 mm, L = 330 mm) were analyzed. Experiments were carried out under steady-state and varying flow rates using 0.012–0.048 wt % of NFs and sodium hexametaphosphate (SHMP) and acetylacetone (ACAC) as surfactants (SFs). …"

Effect of carbon nanotubes on the bonding mechanism of non-corrosive reinforcements to concrete حسب Alaa, Taha

احصل على النص الكامل
احصل على النص الكامل
احصل على النص الكامل

Effect of surfactants on the convective heat transfer and pressure drop characteristics of ZnO/DIW nanofluids: An experimental study حسب Qamar, Adnan

"…Convective heat transfer (HTC) and flow characteristics (pressure drop (ΔP) and friction factor (f)) of aqueous ZnO NFs' within a circular mini tube (Di = 1.0 mm, L = 330 mm) were analyzed. Experiments were carried out under steady-state and varying flow rates using 0.012–0.048 wt % of NFs and sodium hexametaphosphate (SHMP) and acetylacetone (ACAC) as surfactants (SFs). …"
احصل على النص الكامل
احصل على النص الكامل
احصل على النص الكامل

Biodegradable polysaccharide grafted polyacrylamide inhibitor for corrosion in CO₂- saturated saline solution حسب Rem Jalab (11715205)

"…Electrochemical tests of Tafel and AC impedance, were used to determine the corrosion rate of carbon steel (C-steel) and protection efficiency in CO₂-saturated 3.5 wt% NaCl solution. …"