Corrosion Evaluation of 316L Stainless Steel Exposed to CNT-Water Nanofluid حسب Dana Abdeen (18147583)

"…Adsorption isotherm for CNTs adsorption on the surface of the metal and some thermodynamic properties of adsorption were found to help in proposing a mechanism for CNTs corrosion inhibition. It was observed that the SS tested in CNTs nanofluids presented low corrosion rates, which were comparable to those for tap water and lower than those for 3.5 wt.% NaCl solutions. …"

Production and investigation of flexible nanofibers of sPEEK/PVP loaded with RuO2 nanoparticles حسب Mariem Chamakh (14150481)

"…The samples were synthesized with different concentrations of hydrous ruthenium chloride of 2 wt%, 5 wt%, and 10 wt%, and then annealed at a temperature of 300 °C for 4 h to form the ruthenium oxide nanoparticles. …"

Combined effects of treated domestic wastewater, fly ash, and calcium nitrite toward concrete sustainability حسب Abdelrahman Abushanab (17268940)

"…Concrete hardened properties were tested at 7, 28, and 90 days. Test results revealed that TWW slightly decreased concrete compressive and flexural strengths by 5%–12%, whereas it dramatically increased the porosity and chloride permeability by about 40%. …"

Ablation of LAT2 Transporter Causes Intramuscular Glutamine Accumulation and Inhibition of Fasting‐Induced Proteolysis حسب Meritxell Espino‐Guarch (22565774)

"…</p><h3>Results</h3><p dir="ltr">LAT2KO mice experienced a notable reduction in body weight during fasting (WT:14% and LAT2KO:18%, <i>p</i> = 0.02), with a greater reduction in fat mass (0.5‐fold, <i>p</i> = 0.013) and a higher relative retention of muscle mass (1.3‐fold, <i>p</i> = 0.0003) compared with WT. …"

Biodegradable polysaccharide grafted polyacrylamide inhibitor for corrosion in CO₂- saturated saline solution حسب Rem Jalab (11715205)

"…Lastly, potentiostatic testing of steel with AGGPAM at an applied potential of 50 mV illustrated surface protection and decreased current over a prolonged time. …"

Part II.: Dissimilar friction stir welding of nickel titanium shape memory alloy to stainless steel – microstructure, mechanical and corrosion behavior حسب Parker West (17268946)

"…Corrosion properties of the weld zone investigated in 3.5 wt. % NaCl solution showed moderately inferior corrosion resistance of dissimilar weld, compared to individual base metals, as characterized by the surface film impedance and corrosion current density. …"