Correlating the rheological and magneto-optical properties of cobalt substituted magnetite ferrofluids (CoxFe1?xFe2O4) with theoretical studies by Babukutty, B.

“…Faraday rotation of CoxFe1?xFe2O4 ferrofluids is measured depending on the different concentrations of cobalt in applied magnetic field. …”
Get full text
Get full text

Structural and magnetic properties of Ni1-xZnxFe 2O4 (x=0, 0.5 and 1) nanopowders prepared by sol-gel method by Gao P.

“…A series of nanostructured Ni-Zn ferrites Ni1-xZn xFe2O4 (x=0, 0.5 and 1) with a grain size from 24 to 65 nm have been prepared with a sol-gel method. …”
Get full text
Get full text

Study of Magnetic Properties and Lattice Dynamics of the Cdx Co1-x Ferrite System by MossbauerEffect by Eissa, N. A. [نبيل عيسى]

“…The magnetic properties and lattice dynamics of the spinel ferrite system Cdx Coi-x Fe^ 04 (x = 0.0, 0.1, . . . , and 1.) were studied in the temperature range between 78 to 800°K. …”
Get full text

Experimental and numerical investigation of the flexural behavior of one-way RC slabs strengthened with near-surface mounted and externally bonded systems by Aljidda, Omar

“…This study investigated the flexural performance of one-way reinforced concrete (RC) slabs strengthened with two distinct strengthening systems: near-surface mounted (NSM) bars and externally bonded (EB) carbon fiber-reinforced polymer (FRP) strips. …”
Get full text
Get full text

Mossbauer Effect Study of the Cations Distribution and its Influence on the Electric Field Gradient of the Cdx Co1-x Ferrite System by Eissa, N. A. [نبيل عيسى]

“…In the ferrite system Cd,Co,_x Fe; 04 (X=0.0, O.I, 0.2, ....... , 1.0). it was found that the introduction of Co2'1' decrease the EFG at the octahedral B-site. …”
Get full text

Functionalization of silica-coated magnetic nanoparticles as powerful demulsifier to recover oil from oil-in-water emulsion by Elmobarak W.F.

“…The Fe–Si-MNP exhibited excellent %Soil, reliable stability, and high magnetization values ranging between 46.1 and 80.2 emu/g. adding a 5 nm silica layer on the surface of the Fe–Si-MNP (i.e., Fe–Si-1) protected them from oxidation conditions, extended their service life, and achieved a %Soil of ∼96.3%. …”
Get full text
Get full text

Modified zno nanoparticles using iron ions (Fe3+) for photo-catalytic degradation of toxic pollutants under sunlight by Ba-Abbad, Muneer M.

“…As the Fe3+ concentration increased from 0.25 to 1.00 wt. %, the crystal size decreased in comparison with the undoped ZnO. …”
Get full text

Synthesis and characterization of nanocrystalline CoFe2O4-zirconia via propylene oxide aided sol-gel method by Bhosale R.R.

Get full text
Get full text

A new insight into the separation of oil from oil/water emulsion by Fe3O4?SiO2 nanoparticles by Elmobarak W.F.

“…For the oil recovery process, the Fe3O4 was applied for the inhibition (i.e., decrease) of oil sedimentation, and the SiO2 NPs were applied for wettability alteration and IFT reduction. …”
Get full text
Get full text

Investigational Study for the efficiency of Fe3O4@SiO2 nanoparticles in the Oil Recovery Process using glass micromodel by Elhaj, Wamda

“…For the oil recovery process, the Fe3O4 was applied for the inhibition (i.e., decrease) of oil sedimentation, and the SiO2 NPs were applied for wettability alteration and IFT reduction. …”
Get full text
Get full text

Application of Fe3O4 magnetite nanoparticles grafted in silica (SiO2) for oil recovery from oil in water emulsions by Elmobarak W.F.

“…Demulsification process best fits the combined Langmuir-Freundlich (L-F) isotherm with highest adsorption capacity (Qmax) of 186.0 ± 5 mgoil/gMD compared to 86.0 ± 5 mgoil/gMD for Fe3O4, which is 1.1 folds greater than Qmax reported in the literature for other demulsifiers.…”
Get full text
Get full text

Deoxygenation of pyrolysis vapour derived from durian shell using catalysts prepared from industrial wastes rich in Ca, Fe, Si and Al by Tan, Y.L.

“…Catalysts prepared from industrial wastes rich in Fe, Ca, Si, and Al were used in catalytic upgrading of pyrolysis vapour derived from durian shell and their effect on product yield and properties were compared. …”
Get full text
Get full text

Application of magnetic nanoparticles for the removal of oil from oil-in-water emulsion: Regeneration/reuse of spent particles by Elmobarak W.F.

“…The observed %Roil at a pH of 4 and Csur of 0.05 g/L was observed to be > 90 ± 0.1% and decreased by either rising the pH to 7 or increasing the Csur to 0.1 g/L. …”
Get full text
Get full text

Kinetics and mechanism of H2O2 decomposition by Cu(II)-, Co(II)-, and Fe(III)-Amine complexes on the surface of Silica-Alumina (25% Al2O3) by Salem, Mohamed A.

“…Both of the energy and entropy of activation were found to decrease as: en > mea > tea and for one ligand (en) and different metal ions the sequence was Cu(II) > Co(II) > Fe(III). …”
Get full text
Get full text

Fabrication of Selective Sensors for Hg2+ Traces in Water Using Graphene Decorated with Metal Nanoclusters by Ayesh, Ahmad I.

“…Sensitivity measurements were performed using Hg2+ solutions with different concentrations (0.05, 0.1, 0.3, 0.6, 3, 6, 20, 40, and 60 ppb). The selectivity was tested using 0.6 ppb solutions of the following ions: Cr2+, Cd2+, Cu2+, Co2+, Fe2+, Zn2+, and K+. …”
Get full text
Get full text

Partial characterization Of an alkalophilic extracellular Crude pectinases from a bacillus Polymyxa strain by Al Rajabi, Ihab. I. [ايهاب الرجبي وعادل محاسنه]

Get full text

Detoxification assays of tunisian tannery wastewater under nonsterile conditions using the filamentous fungus aspergillus Niger by Boujelben, Raouia

“…Characterization of effluents also revealed high salt levels (EC > 17 mS/cm) and high organic matter content (25 g/L for the UE and 7.2 g/L for the FE) but a low biodegradability since BOD5 did not exceed 2.5 and 1.25 g/L for the UE and the FE, respectively. …”
Get full text
Get full text

Effect of Magnetic Baffles and Magnetic Nanofluid on Thermo-Hydraulic Characteristics of Dimple Mini Channel for Thermal Energy Applications by Souayeh, Basma

“…This clearly shows that the two sources at the front have a higher increment in the Nusselt numbers compared to one source, due to higher turbulence. In addition, there is a decrease in the pressure drop of 10.82%, 16.778%, and 26.75% when magnetic fields of 1200 G, 1500 G, and 2000 G, respectively, are applied at x = 15 mm, as compared to flow without magnetic field when the pitch = 10 mm. …”
Get full text
Get full text
Get full text

Electrocatalytic arsenite oxidation in bicarbonate solutions combined with CO2 reduction to formate by Wonjung, Choi

“…Linear sweep voltammograms of n-TEC exhibit a specific As(III) oxidation peak (Ep,As), at which the Faradaic efficiency (FE) of As(V) production is ∼100 %. However, the application of a potential higher than the peak (E > Ep,As) leads to a significant decrease in the FE due to water oxidation. …”
Get full text
Get full text
Get full text

Ferroelectric Properties and Electrocaloric Effect in Dy2O3 Substitution on Lead-Free (Na0.5 Bi0.5)0.94 Ba0.06TiO3 Ceramic by Turki, O.

“…Using the direct EC measurement, the ceramic corresponding to y = 0.02 exhibited a significant EC response, where ΔT = 1.2 K under 5 kV/mm. The incorporation of Dy was found to enhance the EC responsivity coefficient ζ = iT/ΔE), with a best value of ζ = 0.24 K.mm/kV for y = 0.02.…”
Get full text