Adsorption of Congo Red Dye Using Activated Carbon-Fe3O4 Composite by Mahmud, Nafis

Get full text
Get full text

Correlating the rheological and magneto-optical properties of cobalt substituted magnetite ferrofluids (CoxFe1?xFe2O4) with theoretical studies by Babukutty, B.

Get full text
Get full text

Functionalization of silica-coated magnetic nanoparticles as powerful demulsifier to recover oil from oil-in-water emulsion by Elmobarak W.F.

“…The Fe–Si-MNP exhibited excellent %Soil, reliable stability, and high magnetization values ranging between 46.1 and 80.2 emu/g. adding a 5 nm silica layer on the surface of the Fe–Si-MNP (i.e., Fe–Si-1) protected them from oxidation conditions, extended their service life, and achieved a %Soil of ∼96.3%. …”
Get full text
Get full text

Application of Fe3O4 magnetite nanoparticles grafted in silica (SiO2) for oil recovery from oil in water emulsions by Elmobarak W.F.

“…Demulsification process best fits the combined Langmuir-Freundlich (L-F) isotherm with highest adsorption capacity (Qmax) of 186.0 ± 5 mgoil/gMD compared to 86.0 ± 5 mgoil/gMD for Fe3O4, which is 1.1 folds greater than Qmax reported in the literature for other demulsifiers.…”
Get full text
Get full text

Application of magnetic nanoparticles for the removal of oil from oil-in-water emulsion: Regeneration/reuse of spent particles by Elmobarak W.F.

“…The Fe-MNP were characterized using various analytical techniques and were used to recover oil from oil-in-water emulsion (O-in-W-emu) at various concentrations. …”
Get full text
Get full text

Enhanced oil recovery using hyperbranched polyglycerol polymer-coated silica nanoparticles by Elmobarak W.F.

“…dem improved as the Csur and pH decreased, with maximum values of 98.8% and 98.5% achieved at Csur = 0.05 g/L and a pH = 4, respectively. …”
Get full text
Get full text

Detoxification assays of tunisian tannery wastewater under nonsterile conditions using the filamentous fungus aspergillus Niger by Boujelben, Raouia

“…Characterization of effluents also revealed high salt levels (EC > 17 mS/cm) and high organic matter content (25 g/L for the UE and 7.2 g/L for the FE) but a low biodegradability since BOD5 did not exceed 2.5 and 1.25 g/L for the UE and the FE, respectively. …”
Get full text
Get full text

Enhancing compressive, tensile, thermal and damping response of pure Al using BN nanoparticles by Penchal Reddy M.

Get full text
Get full text

Enhancing oil removal from water using ferric oxide nanoparticles doped carbon nanotubes adsorbents by Fard, Ahmad Kayvani

“…The effect of adsorption parameters, including, adsorbent dosage, contact time, and agitation speed on the oil removal efficiency were optimized using batch experiments. The sorption capacities of doped CNTs were found to be greater than 7 g/g for gasoline oil. …”
Get full text
Get full text

Molecular and Structural Changes in Induced-Brain Stroke Tissue Using FTIR Imaging Spectroscopy, Scanning Electron and Atomic Force Microscopy by Ali, Mohamed H

“…Rat's brains were extracted, embedded in paraffin and then serially sliced, using semi-automated rotary microtome, into 5 ?m thickness sections for the FTIR imaging and AFM analysis and 35 ?…”
Get full text
Get full text

Effect of Magnetic Baffles and Magnetic Nanofluid on Thermo-Hydraulic Characteristics of Dimple Mini Channel for Thermal Energy Applications by Souayeh, Basma

“…When two sources are placed at x = 7.5 mm and 15 mm, there is an decrease of 19.02%, 31.3%, and 50.34% in the pressure drop when the magnetic fields of 1200 G, 1500 G and 2000 G are applied when the pitch = 10 mm. …”
Get full text
Get full text
Get full text

Developing pretreatment methods to promote the production of biopolymer and bioethanol from residual algal biomass (RAB) by Fares, AlMomani

“…The maximum bioethanol production (Mbio−ethP) of 0.950 ± 0.005 mL/gRAB was achieved using microalgae pretreated with Mv-H2O2-Fe-PT and incubated at pH = 5.5 and 37 °C. …”
Get full text
Get full text
Get full text