Fabrication of zno-fe-mxene based nanocomposites for efficient co2 reduction by Kannan, K.

Get full text
Get full text

Deoxygenation of pyrolysis vapour derived from durian shell using catalysts prepared from industrial wastes rich in Ca, Fe, Si and Al by Tan, Y.L.

“…With same silica-to-alumina ratio, catalyst prepared from oil palm ash (AS-OPA) with lower Fe and Ca contents gave higher liquid yield (8.32 wt%) with alcohols (28.90%), hydrocarbons (46.00%), and nitrogen-containing compounds (21.46%) while catalyst prepared from electric arc furnace slag (AS-EAF) with higher Fe and Ca contents produced lower liquid yield (50.21 wt%) with high amount of esters (25.80%) and hydrocarbons (72.82%). …”
Get full text
Get full text

Application of Fe3O4 magnetite nanoparticles grafted in silica (SiO2) for oil recovery from oil in water emulsions by Elmobarak W.F.

“…An excellent %ηdem ≥ 90% was achieved Coil in the range 50–2000 mg/L. Using an MDdose as low as 10 mg/L attained a %ηdem in the range of 93%–94.3% for O/W mixtures with Coil < 2000 mg/L, which slightly decreased to ∼90% for higher concentrations. …”
Get full text
Get full text

Application of magnetic nanoparticles for the removal of oil from oil-in-water emulsion: Regeneration/reuse of spent particles by Elmobarak W.F.

“…The recovery of oil from produced water (PW) is integral for minimizing energy resource loses and creating an appropriate treatment method for a sustainable environment. In this study, Fe3O4 magnetic nanoparticles (Fe-MNP) were synthesized using the combustion synthesis method (CSM) in the temperature range of 150 to 350 °C. …”
Get full text
Get full text

Structural and magnetic properties of Ni1-xZnxFe 2O4 (x=0, 0.5 and 1) nanopowders prepared by sol-gel method by Gao P.

“…The highest coercivity of 50 and 40 Oe, were obtained for NiFe2O 4 and Ni0.5Zn0.5Fe2O4 samples with the grain size of 35 and 29 nm, respectively. …”
Get full text
Get full text

Mechanical Performance and Thermo-Physical Properties of Cement Mortar Incorporating Hybrid Slags by Baawain, Mahad

“…This study investigates the mechanical and thermal properties of cement mortars incorporating two types of waste slags. Ferrochrome (FeCr) slag aggregate was used as a replacement for sand at the ratios of 25, 50, 75 and 100 wt. %. …”
Get full text
Get full text

Effect of Magnetic Baffles and Magnetic Nanofluid on Thermo-Hydraulic Characteristics of Dimple Mini Channel for Thermal Energy Applications by Souayeh, Basma

“…When two sources are placed at x = 7.5 mm and 15 mm, there is an decrease of 19.02%, 31.3%, and 50.34% in the pressure drop when the magnetic fields of 1200 G, 1500 G and 2000 G are applied when the pitch = 10 mm. …”
Get full text
Get full text
Get full text

Experimental and numerical investigation of the flexural behavior of one-way RC slabs strengthened with near-surface mounted and externally bonded systems by Aljidda, Omar

“…In contrast, the slabs reinforced with EB experienced a decrease in ductility ranging from 38 % to 50 %. This reduction was attributed to the differences in the modes of failure observed in both strengthening systems. …”
Get full text
Get full text

Fabrication of Selective Sensors for Hg2+ Traces in Water Using Graphene Decorated with Metal Nanoclusters by Ayesh, Ahmad I.

Get full text
Get full text

Control of the Speed of a Light-Induced Spin Transition through Mesoscale Core-Shell Architecture by Slimani, Ahmed

Get full text
Get full text

Usefulness of In-Situ Synchrotron Study on Scale Formation during CO2 Corrosion of Mild Steel: A Review by Sk, Mobbassar Hassan

Get full text
Get full text

The Influence of Qatari Dust on the Element Composition of Marine Plankton by Yigiterhan, Oguz

“…The relative trace metal composition of plankton from EEZ of Qatar is Fe > Zn ≈ Cu > V ≈ Ni ≈ Cr ≈ As ≈ Mo > Cd ≈ Co. …”
Get full text
Get full text

Electrochemical and X-ray photoelectron spectroscopic investigations of conductive polymers by Waware, Umesh Somaji

“…The chemical and structural composition of the polymers and copolymers were determined by XPS, UV–Vis, and FE-SEM analysis. Electrochemical studies of the as-prepared polymers showed two single-electron oxidations and two single-electron reductions reversibly at various scan rates ranging from 20 to 50 mV and results reveals that the current density of the copolymer was lesser than the conventional polyaniline (PA). …”
Get full text
Get full text
Get full text

Hydropriming with moringa leaf extract mitigates salt stress in wheat seedlings by Ahmed, Talaat

Get full text
Get full text
Get full text

Molecular and Structural Changes in Induced-Brain Stroke Tissue Using FTIR Imaging Spectroscopy, Scanning Electron and Atomic Force Microscopy by Ali, Mohamed H

Get full text
Get full text

Silicon Enhances Morpho–Physio–Biochemical Responses in Arsenic Stressed Spinach (Spinacia oleracea L.) by Minimizing Its Uptake by Saleem, Muhammad Hamzah

“…Although, the activities of enzymatic antioxidants such as superoxidase dismutase, peroxidase, catalase, ascorbate peroxidase in the roots and shoots of the plants and non-enzymatic such as phenolic, flavonoid, ascorbic acid, and anthocyanin contents were initially increased with the exposure of 50 µM As, but decreased by the increasing the As concentration 100 µM in the soil. …”
Get full text
Get full text
Get full text