Decreased Analgesic Requirements in Super Morbidly Versus Morbidly Obese Patients Undergoing Laparoscopic Sleeve Gastrectomy by Hamed Elgendy (14148846)

Water Footprint Assessment and Virtual Water Trade in the Globally Most Water-Stressed Country, Qatar by Nayla Higazy (17679453)

“…The virtual water exports gradually decreased over the years with the most notable decrease in 2018 following Qatar’s blockade. …”

Corrosion Evaluation of 316L Stainless Steel Exposed to CNT-Water Nanofluid by Dana Abdeen (18147583)

“…Three consequent corrosion tests were conducted on 316L stainless steel (SS) exposed to carbon nanotubes (CNTs) water-based nanofluids: open circuit test, polarization resistance test, and potentiodynamic scans. …”

Evaluation of the cementite morphology influence on the hydrogen induced crack nucleation and propagation path in carbon steels by Shabnam Karimi (19457575)

“…<p>The effect of cementite morphology on the crack initiation and growth path was studied using in situ electrochem-ical micro-cantilever bending (ECCB) technique under hydrogen (H) charging. Two carbon steels with lamellar cementite morphology (pearlitic microstructure) and spherical or broken lamellas cementite morphology (spheroidite microstructure), both with approximately the same carbon equivalent, were used in this study. …”

Deep learning-based modeling of land use/land cover changes impact on land surface temperature in Greater Amman Municipality, Jordan (1980–2030) by Khaled F. Alkaraki (22051967)

“…However, agricultural areas decreased from 152.13 km² (18.5%) in 1980 to 140.38 km² (17%) in 2023, while barren lands decreased from 54.44 km² (6.6%) in 1980 to 34.71 km² (4.22%) in 2023. …”

Enhancing the corrosion resistance of reinforcing steel under aggressive operational conditions using behentrimonium chloride by A. Bahgat Radwan (9631720)

“…In conclusion, this new inhibitor shows high corrosion inhibition efficiencies under different aggressive conditions and can be used in concrete to reduce the corrosion rate of reinforcing steel without decreasing the mechanical properties of the concrete.…”

Electrochemical and thermodynamic study on the corrosion performance of API X120 steel in 3.5% NaCl solution by Khuram Shahzad (575887)

“…The overall results revealed that PEI significantly decreases the corrosion rate of API X120 steel with inhibition efficiency of 94% at a concentration of 100 μmol L⁻¹. …”

Assessment of tropospheric NO₂ concentrations over greater Doha using Sentinel-5 TROPOspheric monitoring instrument (TROPOMI) satellite data: Temporal analysis, 2018–202... by Yasir E. Mohieldeen (22155901)

“…<p dir="ltr">This study presents a temporal evaluation of the tropospheric NO₂ column densities over Greater Doha using TROPOMI satellite data from May 2018 to December 2023, and an assessment of the impact of the preparations and hosting of the FIFA Football World Cup Qatar 2022, on NO₂ levels before, during and after the tournament over Greater Doha. …”

Part II.: Dissimilar friction stir welding of nickel titanium shape memory alloy to stainless steel – microstructure, mechanical and corrosion behavior by Parker West (17268946)

“…<p dir="ltr">In the present work, nickel-titanium (NiTi) shape memory alloys (SMAs) is joined to 304 stainless steel (SS) using friction stir welding (FSW) using process parameters of 400 rpm and a constant tool translation speed of 75 mm/min. …”

Biodegradable polysaccharide grafted polyacrylamide inhibitor for corrosion in CO₂- saturated saline solution by Rem Jalab (11715205)

“…Implementing AGGPAM coating reduced the steel corrosion rate to 9.6 mils per year, achieving 71% efficiency. …”

Towards Industry 4.0 and Sustainable Manufacturing Applying Environmentally Friendly Machining of a Precipitation Hardened Stainless Steel Using Hot Turning Process by Mohammadjafar Hadad (17541345)

“…AISI630 stainless steel is used in the manufacture of pressure vessels and components exposed to high-stress and corrosive environments in the oil and gas industries. …”

Theoretical and experimental insights into the C-steel aqueous corrosion inhibition at elevated temperatures in 1.0 M HCl via multi-carbonyl Gemini cationic surfactants by Nasser M. El-Basiony (18021631)

“…We aimed to evaluate these surfactants as potential corrosion inhibitors for carbon steel (CS) in 1 M HCl at temperatures of 25–55 ± 0.1 °C. …”

Changing life expectancy in European countries 1990–2021: a subanalysis of causes and risk factors from the Global Burden of Disease Study 2021 by Nicholas, Steel

Get full text
Get full text
Get full text

Novel Wire Gripper for Robotics Picking of Small Green Parts From Powder Bed of Binder Jet Metal Additive Manufacturing by Abdulhamid Mathkur (22467373)

“…A combination of 304 stainless steel wires integrated with a PLA body allows the device to achieve precise handling and control together with versatile operation. …”

Visitors off the trail: Impacts on the dominant plant, bryophyte and lichen species in alpine heath vegetation in sub-arctic Sweden by Monika, Rawat

“…With a greater decrease in taller forbs and shrubs than in graminoids and prostrate plants, a greater decrease in lichen than in bryophyte species, and a change in vegetation composition. …”
Get full text
Get full text
Get full text

Rebound effects undermine carbon footprint reduction potential of autonomous electric vehicles by Nuri C. Onat (14779093)

“…<p dir="ltr">Autonomous vehicles offer greater passenger convenience and improved fuel efficiency. …”

Evapotranspiration and water availability response to climate change in the Middle East and North Africa by Salah Basem Ajjur (14150967)

“…Outcomes reveal that the MENA region is indeed vulnerable to a surge in temperature, which can increase evapotranspiration losses and decrease water availability. Under the shared socioeconomic pathway (SSP2-4.5), the potential evapotranspiration (PET) has been projected to increase throughout the MENA region by up to 0.37 mm per year during the middle of the twenty-first century (2021–2050) and by up to 0.51 mm per year during the end of the twenty-first century (2071–2100). …”

Trends of the Dementia Burden in South Asia: An Analysis of 2021 Global Burden of Disease Study by Shubham Chauhan (21334742)

“…</p><h3>Results</h3><p dir="ltr">A slight decrease in incidence rates from 80.57 to 79 per 100,000 was observed, alongside a significant increase in mortality rates from 14.11 to 17.2 per 100,000. …”

Trends in the global, regional, and national burden of oral conditions from 1990 to 2021: a systematic analysis for the Global Burden of Disease Study 2021 by Eduardo, Bernabe

“…Untreated dental caries of permanent teeth and severe periodontitis were the most common oral conditions, with a global age-standardised prevalence of 27 500 (24 000 to 32 000) per 100 000 population and 12 500 (10 500 to 14 500) per 100 000 population, respectively. …”
Get full text
Get full text
Get full text

Women’s empowerment as a determinant of neonatal mortality in Sub-Saharan Africa: a narrative review focused on Nigeria by Joel-Medewase Victor Idowu (22155178)

“…Notably, SSA and South Asia are the regions most lagging behind the Sustainable Development Goal (SDG) 3.2, aiming for <12 neonatal deaths per 1,000 live births by 2030. …”