-
1
Application of Fe<sub>3</sub>O<sub>4</sub> magnetite nanoparticles grafted in silica (SiO<sub>2</sub>) for oil recovery from oil in water emulsions
Published 2021“…An excellent %<sub>hdem</sub> 90% was achieved C<sub>oil</sub> in the range 50 e2000 mg/L. Using an MD<sub>dose</sub> as low as 10 mg/L attained a %<sub>hdem</sub> in the range of 93% - 4.3% for O/W mixtures with C<sub>oil</sub> < 2000 mg/L, which slightly decreased to ~90% for higher concentrations. …”
-
2
-
3
-
4
-
5
Comprehensive thermoeconomic, exergoeconomic, and optimization analyses of direct oxy‐combustion supercritical CO<sub>2</sub> intercooled and reheated cycles under design and off‐d...
Published 2022“…At design conditions (high‐pressure of <i>P</i><sub>c,o</sub> = 20 MPa, low‐pressure of <i>P</i><sub>c,o</sub> = 5.4 MPa, TIT = 750°C, CIT = 50°C [dry‐cooling]), the PIC has the highest thermal efficiency (47.78%) compared to 38.36% for DRC, 45.71% for ICC, and 44.39% for RHC. …”
-
6
Biodegradable polysaccharide grafted polyacrylamide inhibitor for corrosion in CO<sub>2</sub>- saturated saline solution
Published 2023“…Nevertheless, the AGGPAM-inhibited solution exhibited a corrosion rate of 26.7 mils per year at 50 °C, which is still lower than that of blank at 25 °C. …”
-
7
-
8
Enhancing the corrosion resistance of reinforcing steel under aggressive operational conditions using behentrimonium chloride
Published 2019“…Using only a 50 μmol L<sup>−1</sup> of BTC, we are able to measure an inhibition efficiency of 91, 79, and 71% in SCP solution with 3.5% NaCl at pH of 12.5, 10 and 7, respectively without showing any effect on the mechanical properties on the cured mortars. …”
-
9
-
10
-
11
-
12
-
13
-
14
-
15
