The effects of gas tungsten arch welding on the corrosion and mechanical properties of AA 6061 T6 by Eltai, Elsadig

“…Corrosion of welded and un-welded Aluminum Alloy 6061 T6 was investigated by immersing specimens in 3.5% (wt) NaCl solution. …”
Get full text
Get full text

Optimization of performance and emission characteristics of CI engine fueled with Jatropha biodiesel produced using a heterogeneous catalyst (CaO) by Singh, A.

“…The heterogeneous transesterification delivered a yield of 81.6% at 5 wt% catalyst concentration and 12:1 methanol to oil molar ratio. …”
Get full text
Get full text

Aluminum nitride (AlN) reinforced electrodeposited Ni-B nanocomposite coatings by Radwan, A. Bahgat

“…The potentiodynamic analysis exhibited that the protection efficiency (PE%) of Ni–B coating is ~20%, which increased to ~53% and ~73% by addition of AlN nanoparticles of 0.6 and 1.2 g L−1, respectively. The corrosion resistance could be credited to the presence of inactive and insulating AlN nanoparticles that filled the existing defects in Ni–B matrix and subsequently decreased the active area exposed to the corrosive electrolyte (3.5 wt.% NaCl).…”
Get full text
Get full text

Improved mechanical properties of recycled linear low-density polyethylene composites filled with date palm wood powder by AlMaadeed, Mariam A.

“…The Young’s modulus of the composites significantly increased as the filler content increased over the entire concentration range. A maximum value of 1989MPa was observed for the composite filled with 70wt.% filler, which was approximately 6.5times higher than that observed for neat RLLDPE. …”
Get full text
Get full text
Get full text

Modification of Pd/CeO2 catalyst by Atomic Layer Deposition of ZrO2 by Onn, Tzia Ming

Get full text
Get full text

Production and investigation of flexible nanofibers of sPEEK/PVP loaded with RuO2 nanoparticles by Chamakh, Mariem

Get full text
Get full text

Experimental Investigation of Foam drilling fluid using Visualization Technique by Barooah, Abinash

“…The experiments were conducted in a 6.16 m long horizontal pipe with 2.5 in. inner diameter and 4.5 in. outer diameter and annular diameter ratio of 1.8. …”
Get full text
Get full text

Prospects Of Amino Acids And Ionic Liquids As Natural Gas Hydrate Inhibitors For Offshore Flow Assurance by Qureshi, M. Fahed Aziz

“…The results show that the selected amino acids and ionic liquids exhibit dual functional behaviour by providing the temperature shift of around 1.5-2.3 oC and delaying the hydrate formation time from 0.5-1.5 hr. …”
Get full text

Conversion of Organic Municipal Wastes into Biochars and their Effect on Fertility Parameters of Normal and Sabkha Soils of Qatar by Ahmedna, Mohamed

“…To each pot, sufficient amount of 0.25-mm sieved biochar was mixed with soil to yield carbon to soil ratios of 0, 1, and 2% (wt/wt). Box-Behnken experimental design was used instead of the full factorial to decrease the number of treatments to a manageable level (126 treatments) with three replications at the center. …”
Get full text
Get full text

Improved flexible, controlled dielectric constant material from recycled LDPE polymer composites by Noorunnisa Khanam, P.

Get full text
Get full text
Get full text

Combined effects of treated domestic wastewater, fly ash, and calcium nitrite toward concrete sustainability by Abushanab, Abdelrahman

Get full text
Get full text

Arabic gum as green agent for ZnO nanoparticles synthesis: properties, mechanism and antibacterial activity by Ba-Abbad, Muneer M.

Get full text
Get full text

Biodegradable polysaccharide grafted polyacrylamide inhibitor for corrosion in CO2- saturated saline solution by Jalab, Rem

“…Lastly, potentiostatic testing of steel with AGGPAM at an applied potential of 50 mV illustrated surface protection and decreased current over a prolonged time. …”
Get full text
Get full text

Development And Performance Evaluation Of Smart Polymeric Coatings For Corrosion Protection Of Steel by Khan, Adnan

“…Most common cause of materials and equipment failure in the oil and gas industry is corrosion. According to one survey, about 1/4 to 1/3 of the total downtime in plants is due to deleterious effects of corrosion. …”
Get full text

Reactive Absorption of CO2 Using Ethylaminoethanol Promoted Aqueous Potassium Carbonate Solvent by Bhosale, Rahul Rambhau

“…The H_(CO2) was observed to be decreased by 5 and 31% due to the increase in the EAE concentration from 0.6 to 2 kmol/m3 and reaction temperature from 303 to 318 K, respectively. …”
Get full text
Get full text