Engineering the Surface and Mechanical Properties of Water Desalination Membranes Using Ultralong Carbon Nanotubes حسب Yehia M. Manawi (18091207)

"…More pronounced effect on membrane’s mechanical properties was observed due to compatibility of CNTs with PS matrix when compared to other factors (i.e., changes in the CNT aspect ratio). The water contact angle for PS membranes incorporated with commercial CNT sharply decreased from 73° to 53° (membrane hydrophilization) for membranes with 0.1 and 1.0 wt. % of CNTs, while for the same loading of produced CNTs the water contact angles for the membrane samples increased from 66° to 72°. …"

Enhancing the corrosion resistance of reinforcing steel under aggressive operational conditions using behentrimonium chloride حسب A. Bahgat Radwan (9631720)

"…Using only a 50 μmol L⁻¹ of BTC, we are able to measure an inhibition efficiency of 91, 79, and 71% in SCP solution with 3.5% NaCl at pH of 12.5, 10 and 7, respectively without showing any effect on the mechanical properties on the cured mortars. …"

Effect of Surface Treatment of Halloysite Nanotubes (HNTs) on the Kinetics of Epoxy Resin Cure with Amines حسب Vahideh Akbari (18768001)

"…Nonisothermal differential scanning calorimetry (DSC) analyses were performed on epoxy nanocomposites containing 0.1 wt.% of P-HNT, A-HNT, and F-HNT. Quantitative analysis of the cure kinetics of epoxy/amine system made by isoconversional Kissinger–Akahira–Sunose (<i>KAS</i>) and <i>Friedman</i> methods made possible calculation of the activation energy (<i>E</i>_α) as a function of conversion (α). …"

Biodegradable polysaccharide grafted polyacrylamide inhibitor for corrosion in CO₂- saturated saline solution حسب Rem Jalab (11715205)

"…Electrochemical tests of Tafel and AC impedance, were used to determine the corrosion rate of carbon steel (C-steel) and protection efficiency in CO₂-saturated 3.5 wt% NaCl solution. …"