Increase in physical activity (100 step, 500 steps or 1000 steps) after the challenge according to decrease in screen time < or ≥60 minutes. by Annaëlle Le Steunf (19838110)

“…<p>Increase in physical activity (100 step, 500 steps or 1000 steps) after the challenge according to decrease in screen time < or ≥60 minutes.…”

Training History: The x-axis represents the number of epochs, and the y-axis represents the L2 error for the four selected data points. by Mouad Klai (20818364)

Point cloud fusion instance effect. by Hongliang Zou (20707270)

Subjects:

Flow diagram illustrating the sequence of procedures executed during one time step defined as tick, each of which represents one week. by Alexandra M. Campbell (3284094)

Subjects:

Effective contact rate over time for the different modelling scenarios considered: fixed, continuously increasing, continuously decreasing and with a step-decrease. by Joshua Looker (21390948)

“…<p>Effective contact rate over time for the different modelling scenarios considered: fixed, continuously increasing, continuously decreasing and with a step-decrease.</p>…”

Innovation, nightlights and a continuous measure of city size. by Saul Estrin (8629173)

Subjects:

Disturbance of coherent behaviour leads to a decrease in information transfer. by Hannah Zoller (19688084)

Patellar 3D-MRI before and after OWHTO in all cases. by Yusuke Fuchioka (22806178)

Table of step height. by Jianbo Jia (717814)

“…Finally, by making corresponding test blocks, it was found that the peak value of forward resistance when the 10.5°test block crossed the steps of 1mm, 2mm and 3mm height decreased by 19.8%, 25.0% and 13.9% respectively, and the mean value decreased by 30.8%, 27.2% and 24.1% respectively, which was close to the simulation results, and verified the accuracy of the finite element analysis results.…”

The well wall step. by Jianbo Jia (717814)

“…Finally, by making corresponding test blocks, it was found that the peak value of forward resistance when the 10.5°test block crossed the steps of 1mm, 2mm and 3mm height decreased by 19.8%, 25.0% and 13.9% respectively, and the mean value decreased by 30.8%, 27.2% and 24.1% respectively, which was close to the simulation results, and verified the accuracy of the finite element analysis results.…”

3-D printed NGV specimen. by Decang Lou (21439960)

“…The results reveal that the large deviation in the manufactured vane (up to 0.5 mm at the leading edge) alters the direction of the coolant flowing out from the leading-edge film-cooling holes, affects the film coverage along the surface, and in consequence, causes the temperature near the stagnation point increasing by approximately 40 K. Furthermore, variations in coolant inlet pressure, decreasing by 10 kPa, and temperature, increasing by 10 K, result in the vane surface temperature increased by 20 ~ 30 K. …”

Creep failure mode and sketch map of step-step fractured rock. by Dengke Yang (842532)

Data Sheet 1_An autonomous navigation method for orchard mobile robots based on octree 3D point cloud optimization.docx by Hailong Li (216327)

“…However, the increased richness of information provided by 3D LiDAR also leads to a higher computational burden for point cloud data processing, posing challenges to real-time navigation. …”

Reconstruction steps. by Mengyao Zhou (9266132)

Mean values and 95% confidence intervals for recovery time, Average NN Interval (AVNN); Standard Deviation of NN Intervals (SDNN), Low Frequency/ High Frequency Ratio (LF/HF); and... by Robert Trybulski (10998702)

The result of the deviation of the angle axis between the RD and the three-dimensional point cloud coordinates during the actual movement process. by Hongliang Zou (20707270)

Subjects:

Largest changes in influenza vaccine rates, Pre- vs. Post-COVID-19. by Tyler B. Nofzinger (21560244)

Subjects:

Femoral trochlear 3D-MRI before and after OWHTO in all cases. by Yusuke Fuchioka (22806178)

Comparison of different spatializations for the 3D model. by Zakaria Belghali (22581967)

Algorithm operation steps. by Junyan Wang (4738518)