Penalty conversions yield large practical decreases, but robustness and generalizability of result are limited by data quality and sample selection. by Ryan J. Treves (13527735)

LBM-based approach using synchronous transformation with a time step of 0.43s, PNGM-based method using asynchronous transformation with a 5s time step, VGA using explicit scheme wi... by Mouad Klai (20818364)

Lens profiles as Ez (orange lines) force was increased and Az and Pz (green lines) forces were decreased. by Ronald A. Schachar (16674576)

Expression of lipid biosynthetic genes is decreased with polyamine depletion. by Yazmin E. Cruz-Pulido (20285238)

Comparison of diffusion simulations: implicit scheme of the GDE with a 30-second time step (blue line), implicit scheme of the PNGM with α = 0.6 and a 15-second time step (green li... by Mouad Klai (20818364)

nsP4-C483Y or Q192L mutations decrease sensitivity to 4′-FlU. by Peiqi Yin (6533747)

Increase in physical activity (100 step, 500 steps or 1000 steps) after the challenge according to decrease in screen time < or ≥60 minutes. by Annaëlle Le Steunf (19838110)

“…<p>Increase in physical activity (100 step, 500 steps or 1000 steps) after the challenge according to decrease in screen time < or ≥60 minutes.…”

Training History: The x-axis represents the number of epochs, and the y-axis represents the L2 error for the four selected data points. by Mouad Klai (20818364)

Innovation, nightlights and a continuous measure of city size. by Saul Estrin (8629173)

Point cloud fusion instance effect. by Hongliang Zou (20707270)

Subjects:

Schematic diagram of monitoring points and units. by Jie Zhao (49409)

“…Using the three-dimensional finite difference software FLAC^3D (Fast Lagrangian Analysis of Continua), we conducted numerical simulations of both unreinforced and reinforced liquefiable sand foundations. A three-dimensional model was developed, incorporating dynamic analysis with the PL-Finn constitutive model to simulate post-liquefaction large deformations. …”

Model monitoring points and units coordinates. by Jie Zhao (49409)

“…Using the three-dimensional finite difference software FLAC^3D (Fast Lagrangian Analysis of Continua), we conducted numerical simulations of both unreinforced and reinforced liquefiable sand foundations. A three-dimensional model was developed, incorporating dynamic analysis with the PL-Finn constitutive model to simulate post-liquefaction large deformations. …”

Effective contact rate over time for the different modelling scenarios considered: fixed, continuously increasing, continuously decreasing and with a step-decrease. by Joshua Looker (21390948)

“…<p>Effective contact rate over time for the different modelling scenarios considered: fixed, continuously increasing, continuously decreasing and with a step-decrease.</p>…”

Polylactic Acid/Polybutylene Adipate Terephthalate-Carbon Nanotube Nanobiocomposites with a Segregated Toughening Morphology Yielding Large Ductility for Biocompatible Materials by Utsab Ayan (18552401)

Subjects:

Disturbance of coherent behaviour leads to a decrease in information transfer. by Hannah Zoller (19688084)

Patellar 3D-MRI before and after OWHTO in all cases. by Yusuke Fuchioka (22806178)

Data Sheet 1_An autonomous navigation method for orchard mobile robots based on octree 3D point cloud optimization.docx by Hailong Li (216327)

“…This method exhibits tremendous potential for processing large-scale 3D point cloud data and enhancing path planning efficiency, providing a valuable technical reference for the real-time autonomous navigation of mobile robots in complex orchard environments.…”

Table of step height. by Jianbo Jia (717814)

“…Finally, by making corresponding test blocks, it was found that the peak value of forward resistance when the 10.5°test block crossed the steps of 1mm, 2mm and 3mm height decreased by 19.8%, 25.0% and 13.9% respectively, and the mean value decreased by 30.8%, 27.2% and 24.1% respectively, which was close to the simulation results, and verified the accuracy of the finite element analysis results.…”

The well wall step. by Jianbo Jia (717814)

“…Finally, by making corresponding test blocks, it was found that the peak value of forward resistance when the 10.5°test block crossed the steps of 1mm, 2mm and 3mm height decreased by 19.8%, 25.0% and 13.9% respectively, and the mean value decreased by 30.8%, 27.2% and 24.1% respectively, which was close to the simulation results, and verified the accuracy of the finite element analysis results.…”

3-D printed NGV specimen. by Decang Lou (21439960)

“…The results reveal that the large deviation in the manufactured vane (up to 0.5 mm at the leading edge) alters the direction of the coolant flowing out from the leading-edge film-cooling holes, affects the film coverage along the surface, and in consequence, causes the temperature near the stagnation point increasing by approximately 40 K. Furthermore, variations in coolant inlet pressure, decreasing by 10 kPa, and temperature, increasing by 10 K, result in the vane surface temperature increased by 20 ~ 30 K. …”