Enhanced quality factor of polyvinyl formal (PVF) based nanocomposites filled with zinc oxide and carbon black nanoparticles for wireless sensing applications by Mohanapriya, M.K.

“…The incorporation of ZnO at 10% decreases Q-factor to 36.1. Incorporation of CBNP at 5% and ZnO at 5% further reduces the Q-factor to 13.7. …”
Get full text
Get full text

Mechanical and microstructure characterization of hard nanostructured N-bearing thin coating by Cabibbo, M.

“…The main problem with steel, is that it exhibits a relatively low hardness (below 10GPa) which strongly decreases upon annealing above about 600K. …”
Get full text

Structural and electrochemical properties of electrodeposited Ni-P nanocomposite coatings containing mixed ceramic oxide particles by Zadeh, K.M.

“…The coatings were electrodeposited on mild steel substrate and were then characterized using various techniques. …”
Get full text
Get full text

High temperature thermal stability of innovative nanostructured thin coatings for advanced tooling by Cabibbo, Marcello

“…The main problem with steel, isthat itexhibits a relatively low hardness (below 10 GPa) which strongly decreases upon annealing above about 600 K.Thus, the majority of modern tools are nowadays coated with hard coatings that increase the hardness, decrease the coefficient of friction and protect the tools against oxidation. …”
Get full text
Get full text

Effect of electroless bath composition on the mechanical, chemical, and electrochemical properties of new NiP-C 3 N 4 nanocomposite coatings by Fayyad E.M.

“…An electroless bath of 0.5 g L−1 C3N4 offered a nanocomposite coating with the highest microhardness and superior corrosion resistance. …”
Get full text
Get full text

Improvement of ternary recycled polymer blend reinforced with date palm fibre by Khanam, P. Noorunnisa

“…The date palm fibre reinforced composites (CD00) were prepared by maintaining constant weight% of fibre of 20wt% without any fibre treatment. Maleic anhydride (MA) was used as the compatabilizer (1 and 2wt%) and the effect of compatabilizer on the blend matrix composites was studied. …”
Get full text
Get full text
Get full text

دراسة تأثير تركيز تيترا أيزوبروبكسيد التيتانيوم (TTIP) على بعض مواصفات ألياف ثنائي أكسيد التيتانيوم النانوية المغزولة كهربائياً... by طهماز, غزل

Get full text

Thermal characterization of phase change materials based on linear low-density polyethylene, paraffin wax and expanded graphite by Sobolciak, Patrik

“…A similar decrease in sensible heat with increased loading of EG was observed for PCMs containing 50 wt.% of EG. …”
Get full text
Get full text

Synthesis and properties of HA/ZnO/CNT nanocomposite by Ding M.

“…The goal of this study was to examine the tribomechanical properties of hydroxyapatite (HA)/ZnO and HA/ZnO/CNT composite ceramics (carbon nanotubes; with different ratios 0.5 wt%, 1.0 wt%, and 1.5 wt%). The composites were synthesized using the hydrothermal method in an autoclave. …”
Get full text
Get full text

Prospects Of Amino Acids And Ionic Liquids As Natural Gas Hydrate Inhibitors For Offshore Flow Assurance by Qureshi, M. Fahed Aziz

“…The results show that the selected amino acids and ionic liquids exhibit dual functional behaviour by providing the temperature shift of around 1.5-2.3 oC and delaying the hydrate formation time from 0.5-1.5 hr. …”
Get full text

Shear Behavior of Green Concrete Beams Reinforced with Basalt FRP Bars and Stirrups. by Elahtem, Ayman Ahmed

“…The parameters investigated in this study are span to depth ratio (i.e. a/d =2.5 and 3.5), reinforcement ratio , stirrups spacing effect (i.e. 250 mm and 350 mm) and stirrups type (Steel and Basalt). …”
Get full text

Conversion of Organic Municipal Wastes into Biochars and their Effect on Fertility Parameters of Normal and Sabkha Soils of Qatar by Ahmedna, Mohamed

“…To each pot, sufficient amount of 0.25-mm sieved biochar was mixed with soil to yield carbon to soil ratios of 0, 1, and 2% (wt/wt). Box-Behnken experimental design was used instead of the full factorial to decrease the number of treatments to a manageable level (126 treatments) with three replications at the center. …”
Get full text
Get full text

Experimental Investigation of Foam drilling fluid using Visualization Technique by Barooah, Abinash

“…The experiments were conducted in a 6.16 m long horizontal pipe with 2.5 in. inner diameter and 4.5 in. outer diameter and annular diameter ratio of 1.8. …”
Get full text
Get full text

Isothermal crystallization kinetics and morphology of double crystalline PCL/PBS blends mixed with a polycarbonate/MWCNTs masterbatch by Gumede T.P.

“…The nanocomposites contained 1.0 and 4.0 wt% MWCNTs. The blends showed a sea-island morphology typical of immiscible blends. …”
Get full text
Get full text

Changes In Biomass Gain, Protein Content And Hormonal Levels In Wheat Kernels In Response To Soil Drench With Sodium Salicylate by Abo Hamed, S. A.

“…Drenching of soil with sodim salycylate (800,4000 and 8000mg/l) increased grain f. wt. and d. wt. Protein content was increased in grains at days 23 and 60 with 800 mg/1 salicylate. …”
Get full text

Improved flexible, controlled dielectric constant material from recycled LDPE polymer composites by Noorunnisa Khanam, P.

“…In this study, recycled low density polyethylene (RLDPE) is developed with the addition of aluminum oxide (Al2O3) to have new polymer composites. The following wt% were used of the filler (1, 4 and 6 wt%). Tensile properties, Hardness, scanning electron microscopy (SEM) thermo gravimetric analysis, differential scanning calorimetry and dielectric properties were studied for these composites. 4 wt% Al2O3/RLDPE composites showed the optimum values of 15.52, 180.8 and 59.72 MPa for the tensile strength, tensile modulus and hardness were reported. …”
Get full text
Get full text
Get full text

Tribological studies of nanomodified mineral based multi-grade engine oil by Laad, M.

“…Tests were carried under loads of 40N, 60N and 90N at sliding speeds 0.5 m/s, 1.0 m/s and 1.5 m/s. Nanoparticle concentration in the mineral oil was taken as 1.5 wt%. …”
Get full text
Get full text

Modelling of the flow behaviour of wrought aluminium alloys at elevated temperatures by a new constitutive equation by El Mehtedi, M.

“…The calculation indicated that the activation energy for hot working decreased from 218 to 198kJmol−1 in the considered range of strain.…”
Get full text
Get full text
Get full text

Experimental and theoretical studies on the mechanical and structural changes imposed by the variation of clay loading on poly(vinyl alcohol)/cloisite 93A nanocomposites by Kabalan L.

Get full text
Get full text

Modified zno nanoparticles using iron ions (Fe3+) for photo-catalytic degradation of toxic pollutants under sunlight by Ba-Abbad, Muneer M.

“…As the Fe3+ concentration increased from 0.25 to 1.00 wt. %, the crystal size decreased in comparison with the undoped ZnO. …”
Get full text