Structural and magnetic properties of Ni1-xZnxFe 2O4 (x=0, 0.5 and 1) nanopowders prepared by sol-gel method by Gao P.

“…A series of nanostructured Ni-Zn ferrites Ni1-xZn xFe2O4 (x=0, 0.5 and 1) with a grain size from 24 to 65 nm have been prepared with a sol-gel method. …”
Get full text
Get full text

Correlating the rheological and magneto-optical properties of cobalt substituted magnetite ferrofluids (CoxFe1?xFe2O4) with theoretical studies by Babukutty, B.

Get full text
Get full text

Synthesis and characterization of nanocrystalline CoFe2O4-zirconia via propylene oxide aided sol-gel method by Bhosale R.R.

Get full text
Get full text

A new insight into the separation of oil from oil/water emulsion by Fe3O4?SiO2 nanoparticles by Elmobarak W.F.

“…In contrast, the value achieved for the seawater injection was 76.5%. For the oil recovery process, the Fe3O4 was applied for the inhibition (i.e., decrease) of oil sedimentation, and the SiO2 NPs were applied for wettability alteration and IFT reduction. …”
Get full text
Get full text

Investigational Study for the efficiency of Fe3O4@SiO2 nanoparticles in the Oil Recovery Process using glass micromodel by Elhaj, Wamda

“…In contrast, the value achieved for the seawater injection was 76.5%. For the oil recovery process, the Fe3O4 was applied for the inhibition (i.e., decrease) of oil sedimentation, and the SiO2 NPs were applied for wettability alteration and IFT reduction. …”
Get full text
Get full text

Application of Fe3O4 magnetite nanoparticles grafted in silica (SiO2) for oil recovery from oil in water emulsions by Elmobarak W.F.

Get full text
Get full text

Ferroelectric Properties and Electrocaloric Effect in Dy2O3 Substitution on Lead-Free (Na0.5 Bi0.5)0.94 Ba0.06TiO3 Ceramic by Turki, O.

“…Using the direct EC measurement, the ceramic corresponding to y = 0.02 exhibited a significant EC response, where ΔT = 1.2 K under 5 kV/mm. The incorporation of Dy was found to enhance the EC responsivity coefficient ζ = iT/ΔE), with a best value of ζ = 0.24 K.mm/kV for y = 0.02.…”
Get full text

Functionalization of silica-coated magnetic nanoparticles as powerful demulsifier to recover oil from oil-in-water emulsion by Elmobarak W.F.

“…The Fe–Si-MNP exhibited excellent %Soil, reliable stability, and high magnetization values ranging between 46.1 and 80.2 emu/g. adding a 5 nm silica layer on the surface of the Fe–Si-MNP (i.e., Fe–Si-1) protected them from oxidation conditions, extended their service life, and achieved a %Soil of ∼96.3%. …”
Get full text
Get full text

Modified zno nanoparticles using iron ions (Fe3+) for photo-catalytic degradation of toxic pollutants under sunlight by Ba-Abbad, Muneer M.

“…As the Fe3+ concentration increased from 0.25 to 1.00 wt. %, the crystal size decreased in comparison with the undoped ZnO. …”
Get full text

Fabrication of Selective Sensors for Hg2+ Traces in Water Using Graphene Decorated with Metal Nanoclusters by Ayesh, Ahmad I.

“…Interdigitated parallel Au electrodes (with electrode separation of 100 μm) were fabricated by thermal evaporation using a Torr International evaporator through a shadow mask on the surface of graphene [6]. Two batches of sensors were tested in this work: i) sensors based on graphene only, and ii) sensors based on graphene and percolating films of Au nanoclusters, each has a thickness of 5 nm. …”
Get full text
Get full text

Deoxygenation of pyrolysis vapour derived from durian shell using catalysts prepared from industrial wastes rich in Ca, Fe, Si and Al by Tan, Y.L.

Get full text
Get full text

Study of Magnetic Properties and Lattice Dynamics of the Cdx Co1-x Ferrite System by MossbauerEffect by Eissa, N. A. [نبيل عيسى]

“…The results showed also that the introduction of the Cd2"^ ions decreased the f-value and Debye temperature, while the mean square velocity of the "Fe nucleus was not affected greatly specially at low and normal temperatures. …”
Get full text

Usefulness of In-Situ Synchrotron Study on Scale Formation during CO2 Corrosion of Mild Steel: A Review by Sk, Mobbassar Hassan

“…500 mV (vs SCE), together with the intensities of the Fe and FeCO3 signals from the in-situ synchrotron XRD [1]. …”
Get full text
Get full text

Electrocatalytic arsenite oxidation in bicarbonate solutions combined with CO2 reduction to formate by Wonjung, Choi

“…This study presents a hybrid electrochemical system that catalyzes the oxidation of As(III) to As(V) with a nanoparticulate TiO2 electrocatalyst (Ti/Ir1-xTaxOy/TiO2; denoted as an n-TEC) while simultaneously converting CO2 to formate on a Bi electrode in aqueous bicarbonate solutions at circum-neutral pH. …”
Get full text
Get full text
Get full text

Partial characterization Of an alkalophilic extracellular Crude pectinases from a bacillus Polymyxa strain by Al Rajabi, Ihab. I. [ايهاب الرجبي وعادل محاسنه]

Get full text

Detoxification assays of tunisian tannery wastewater under nonsterile conditions using the filamentous fungus aspergillus Niger by Boujelben, Raouia

“…Characterization of effluents also revealed high salt levels (EC > 17 mS/cm) and high organic matter content (25 g/L for the UE and 7.2 g/L for the FE) but a low biodegradability since BOD5 did not exceed 2.5 and 1.25 g/L for the UE and the FE, respectively. …”
Get full text
Get full text

Effect of Magnetic Baffles and Magnetic Nanofluid on Thermo-Hydraulic Characteristics of Dimple Mini Channel for Thermal Energy Applications by Souayeh, Basma

“…The increment changed to 1.82%, 8.16%, and 22.31% for a pitch = 5 mm and 1.01%, 5.96%, and 21.38% for a pitch = 2.5 mm. …”
Get full text
Get full text
Get full text

DC conductivity and Seebeck coefficient of nonstoichiometric MgCuZn ferrites by Madhuri, W.

“…Nonstoichiometric series of Mg0.5-xCuxZn0.5Fe1.9O4-? where x = 0.0, 0.1, 0.15, 0.2 and 0.25 has been synthesized by conventional solid state reaction route. …”
Get full text
Get full text

Molecular and Structural Changes in Induced-Brain Stroke Tissue Using FTIR Imaging Spectroscopy, Scanning Electron and Atomic Force Microscopy by Ali, Mohamed H

“…Figure 6a represents the loading spectra of the first three principal component analysis (PC1, PC2 and PC3). The variations principally were located in the regions of amide I band at (?…”
Get full text
Get full text

Developing pretreatment methods to promote the production of biopolymer and bioethanol from residual algal biomass (RAB) by Fares, AlMomani

“…The maximum bioethanol production (Mbio−ethP) of 0.950 ± 0.005 mL/gRAB was achieved using microalgae pretreated with Mv-H2O2-Fe-PT and incubated at pH = 5.5 and 37 °C. …”
Get full text
Get full text
Get full text