Design and analysis of PV fed high-voltage gain DC-DC converter using PI and NN controllers by Madisa V.G., Varaprasad

“…Here, 48 V is doubled to 400 V. By modifying the converter's parameters, its behavior is evaluated. …”
Get full text
Get full text
Get full text

Structural and physical properties of the dust particles in Qatar and their influence on the PV panel performance by Brahim Aïssa (14157243)

“…However, even when these characteristics have been addressed appropriately, there are other factors that adversely affect the performance of PV systems, namely the temperature-induced voltage decrease leading to a PV power loss and the dust accumulation (soiling). …”

Correlating the rheological and magneto-optical properties of cobalt substituted magnetite ferrofluids (Co_xFe_1−xFe₂O₄) with theoretical... by Blessy Babukutty (17871482)

“…An environmental friendly method of co-precipitation is applied to generate Co_xFe_1−xFe₂O₄ with variable dopant concentration (x = 0–0.8), which is deeply investigated by structural and functional property analyses of the ferrofluids. …”

Performance of Monofacial and Bifacial Silicon Heterojunction Modules under Desert Conditions and the Impact of PV Soiling by Amir A. Abdallah (11183642)

“…Moreover, the bifacial module was found to be less sensitive to the PV soiling than the monofacial module. The results showed that the frequency of module cleaning could be reduced for the bifacial module compared with the monofacial module, resulting in a remarkable decrease in the module cleaning cost and PV site Operation and Maintenance cost.…”

Removal of Benzene and Toluene from Synthetic Wastewater by Adsorption onto Magnetic Zeolitic Imidazole Framework Nanocomposites by George Z. Kyzas (740387)

“…Thus, by performing the present study, the potential of Fe₃O₄/zeolite imidazolate framework nanoparticles (Fe₃O₄@ZIF-8) was evaluated for the adsorption of benzene and toluene. …”

Optimal Energy Dispatch Engine for PV-DG-ESS Hybrid Power Plants Considering Battery Degradation and Carbon Emissions by Laith Kanaan (21632714)

“…To test the performance of the developed model, real-time load and photovoltaic (PV) data were used in conjunction with a PV-DG-ESS hybrid plant. …”

Determining the influencing factors in the residential rooftop solar photovoltaic systems adoption: Evidence from a survey in Qatar by Omar F. Alrawi (19418938)

“…<p>Renewable energy sources have developed rapidly, decreased in cost, and proven to have the potential to limit global warming. …”

Rooftop Photovoltaic Systems Adoption Using a Sequential Mixed Methods Approach in Qatar by Omar Alrawi (18060856)

“…Rooftop and building-integrated photovoltaic (PV) systems are ideal for collecting solar energy. …”

A new method for improving the solar photovoltaic unit efficiency through neem oil as coolant medium for high power applications—an experimental investigation by Karthikeyan Ganesan (269200)

“…Thus, the critical outcomes of the monocrystalline and polycrystalline PV panels are to decrease the panel temperature by 2.29% and 4.34%, respectively, and enhance the efficiency of the PV panels by 15.0% and 17.8%, respectively.…”

A pathway to 25% reduction in greenhouse gas emission by 2030 using GIS-Based multi-criteria decision making for renewables, date palm (phoenix dactylifera), and carbon credits: a... by Hazrat Bilal (7367477)

“…Also, while Qatar has the potential to meet 20% of its energy demand by 2030 from renewable sources by using solar PV and wind, this will only account for a 14.28% reduction in overall emissions. …”

A new insight into the separation of oil from oil/water emulsion by Fe₃O₄–SiO₂ nanoparticles by Wamda Faisal Elmobarak (17058024)

“…For the oil recovery process, the Fe₃O₄ was applied for the inhibition (i.e., decrease) of oil sedimentation, and the SiO₂ NPs were applied for wettability alteration and IFT reduction. …”

Application of Fe₃O₄ magnetite nanoparticles grafted in silica (SiO₂) for oil recovery from oil in water emulsions by Wamda Faisal Elmobarak (17058024)

“…<p dir="ltr">In this study, an innovative magnetic demulsifier (MD) was prepared by grafting a silica layer onto the surface of the Fe₃O₄ magnetic nanoparticles (MNPs) using the modified Stober process. …”

Application of Zn-ferrite towards thermochemical utilization of carbon dioxide: A thermodynamic investigation by Rahul R. Bhosale (6467102)

“…The decrease in the reduction temperature is significant when the ratio of the molar flow rate of inert sweep gas to the molar flow rate of ZnFe₂O₄ increases from 10 to 30. …”

Grid integration of renewable energy in Qatar: Potentials and limitations by Eric C. Okonkwo (14151060)

“…The results show that large-scale installations of renewable energy technologies can decrease the emission rate from electricity production at a relatively lower cost. …”

Thermal energy storage with phase change materials to increase the efficiency of solar photovoltaic modules by Torsten Klemm (19691671)

“…<p>Thermal management is an essential design part for the application of solar photovoltaic (PV) modules, especially in hot regions in the Middle East. …”

Deep Learning-Based Fault Diagnosis of Photovoltaic Systems: A Comprehensive Review and Enhancement Prospects by Majdi Mansouri (16869885)

“…These faults may affect the different system components such as PV modules, connection lines, converters/inverters, which can lead to a decrease in the efficiency, performance, and further system collapse. …”

Insights on the effect of water content in carburizing gas mixtures on the metal dusting corrosion of iron by El Tayeb Bentria (9904024)

“…At later stage, the formation of oxide scale leads to an elevated concentration of H₂O/OH molecules on the surface due to the decrease in Fe affinity to dissociate water. This results into blocking the Fe catalytic sites leading to lower C and O diffusion to the bulk of the sample.…”

Plasma volume variations in response to high intensity interval training in obese women: The influential role of menopausal status and age by Jabbour, Georges

“…Following HIIT, only menopause status accounted for 19 % of the variation in PV decreases after warm-up and 21 % of the variation in PV decreases after SCT. …”
Get full text
Get full text
Get full text

Ferroelectric Properties and Electrocaloric Effect in Dy2O3 Substitution on Lead-Free (Na0.5 Bi0.5)0.94 Ba0.06TiO3 Ceramic by Turki, O.

“…Higher stability of the ferroelectric (FE) phase was obtained at room temperature for the compositions y = 0.01, 0.02 and 0.05, with optimum values for y = 0.02 as remanent polarization Pr = 32µC/cm2, as well as piezoelectric coefficients d33 = 137 pC/N, kp = 0.27 and kt = 0.16, whereas a higher content of Dy (y = 0.08) induced a remarkable decrease of the ferroelectric and piezoelectric properties. …”
Get full text

A robust experimental-based artificial neural network approach for photovoltaic maximum power point identification considering electrical, thermal and meteorological impact by Samer Gowid (15955152)

“…<p dir="ltr">This paper aims to develop a robust and practical photovoltaic (PV) Maximum Power Point (MPP) identification tool developed using reliable experimental data sets. …”