Effects of Combined Calcium Hypochlorite and Chlorine Dioxide on Drinking Water Quality in Qatar and Disinfection by Products Formation by Mohamed, Elsamoul H.

Get full text
Get full text

Arabic gum as green agent for ZnO nanoparticles synthesis: properties, mechanism and antibacterial activity by Ba-Abbad, Muneer M.

“…The size of the spherically shaped ZnO NPs decreased with an increase in the amount of Arabic gum, up to an optimal 1.50 wt%. …”
Get full text
Get full text

Natural aging of shape stabilized phase change materials based on paraffin wax by Krupa, Igor

“…Firstly, EG suppressed leakage of paraffin wax from the compact shape of SSPCMs. The addition of 15 wt% of EG to shape stabilized phase change materials (SSPCMs) containing 50 wt% of wax caused a decreasing in the leakage of wax by 50% over 210 days of natural aging. …”
Get full text
Get full text

Synthesis of High-Antifouling and Antibacterial Ultrafiltration Membranes Incorporating Low Concentrations of Graphene Oxide by Alkhouzaam, Abedalkader Ibraheem

“…The pure water permeability (PWP) decreased with loadings of GO from 181.7 L.m-2.h-1.bar-1 of pure PSF to 181.1 and 167.4 L.m-2.h-1.bar-1 with 0.02 and 0.1 wt.% GO respectively. …”
Get full text
Get full text

Synthesis and characterization of stir casted Cu-ZrO2-Graphite hybrid metal matrix composites for thermal management structures by Mittal, Prateek

“…ZrO2 and Graphite reinforcements were added (0.5–0.5, 1.0–1.0, 1.5–1.5 and 2.0–2.0 wt %) in the four composite samples prepared via stir casting. …”
Get full text
Get full text
Get full text

Improvement of ternary recycled polymer blend reinforced with date palm fibre by Khanam, P. Noorunnisa

“…The date palm fibre reinforced composites (CD00) were prepared by maintaining constant weight% of fibre of 20wt% without any fibre treatment. Maleic anhydride (MA) was used as the compatabilizer (1 and 2wt%) and the effect of compatabilizer on the blend matrix composites was studied. …”
Get full text
Get full text
Get full text

Structural and mechanical characterization of stir cast Al–Al2O3–TiO2 hybrid metal matrix composites by Ahamad, N.

“…Scanning electron microscopy shows that aluminium matrix has uniform distribution of reinforcement particle i.e. aluminium oxide and titanium oxide. Density of composite decreases due to variation of reinforcement and it shows low density after preheating. …”
Get full text
Get full text

Structural, wear and thermal behaviour of Cu–Al2O3–graphite hybrid metal matrix composites by Mittal, P.

“…Copper matrix composites with Al2O3–graphite reinforcement (0.5-0.5, 1.0-1.0, 1.5-1.5 and 2.0-2.0 wt%) were prepared by stir casting process. …”
Get full text
Get full text

Modification of Pd/CeO2 catalyst by Atomic Layer Deposition of ZrO2 by Onn, Tzia Ming

“…Modification of a 1 wt% Pd/CeO2 catalyst by Atomic Layer Deposition of thin ZrO2 films was studied. …”
Get full text
Get full text

Phase change materials based on high-density polyethylene filled with microencapsulated paraffin wax by Krupa, Igor

Get full text
Get full text

Changes In Biomass Gain, Protein Content And Hormonal Levels In Wheat Kernels In Response To Soil Drench With Sodium Salicylate by Abo Hamed, S. A.

“…Drenching of soil with sodim salycylate (800,4000 and 8000mg/l) increased grain f. wt. and d. wt. Protein content was increased in grains at days 23 and 60 with 800 mg/1 salicylate. …”
Get full text

Influence of nitrogen doping on the electrocatalytic activity of Ni-incorporated carbon nanofibers toward urea oxidation by Barakat, Nasser A.M.

“…However, the electrochemical measurements indicated that the content of the urea in the initial electrospun solution should be optimized as the results showed that the best nickel surface activation as well as the maximum observed current density can be achieved when the urea content is kept at 5 wt%. Typically, the observed current densities using 1.0 M urea (in 1 M KOH) were 3.15, 29.7, 13.75, 47.55, 14.13 and 9.85 mA/cm2 for the nanofibers obtained from electrospun solutions having 0, 1, 2, 5, 7 and 9 wt% urea, respectively. …”
Get full text
Get full text

Effect Of The Apical Ectodermal Ridge On Mitotic Index In Hind Limb Bud Mesenchyme In Bufo Regularis by Abdel Karim, Ahmed E.

“…The operated bud (80% of cases) showed a decrease in its volume and there was no significant difference in mesenchyme MI. …”
Get full text

Excess pCO2 and carbonate system geochemistry in surface seawater of the exclusive economic zone of Qatar (Arabian Gulf) by Connor, Izumi

“…The slope suggests that removal of C as CaCO3, organic matter (CH2O) or gas exchange (FCO2) is occurring with a ratio of ΔCaCO3/(ΔCH2O or FCO2) = 1:2.86. The tracer Alk*, defined as the deviation of potential alkalinity (AP) (where AP = TA + 1.26 [NO3]) from conservative potential alkalinity ((ApC), (ApC = S Ap′S′ where A'P and S′ are mean values for the whole surface ocean) has values primarily determined by CaCO3 precipitation and dissolution. …”
Get full text
Get full text
Get full text

Excess pCO2 and carbonate system geochemistry in surface seawater of the exclusive economic zone of Qatar (Arabian Gulf) by Connor, Izumi

“…The slope suggests that removal of C as CaCO3, organic matter (CH2O) or gas exchange (FCO2) is occurring with a ratio of ΔCaCO3/(ΔCH2O or FCO2) = 1:2.86. The tracer Alk*, defined as the deviation of potential alkalinity (AP) (where AP = TA + 1.26 [NO3]) from conservative potential alkalinity ((ApC), (ApC = S Ap′S′ where A'P and S′ are mean values for the whole surface ocean) has values primarily determined by CaCO3 precipitation and dissolution. …”
Get full text
Get full text
Get full text

Experimental and theoretical studies on the mechanical and structural changes imposed by the variation of clay loading on poly(vinyl alcohol)/cloisite 93A nanocomposites by Kabalan L.

Get full text
Get full text

Morphology, Nucleation, and Isothermal Crystallization Kinetics of Poly(ε-caprolactone) Mixed with a Polycarbonate/MWCNTs Masterbatch by Gumede, Thandi P.

“…The thermal conductivities (i.e., 4 wt % MWCNTs) were enhanced by 20% in comparison to the neat material. …”
Get full text
Get full text

Modelling of the flow behaviour of wrought aluminium alloys at elevated temperatures by a new constitutive equation by El Mehtedi, M.

“…The calculation indicated that the activation energy for hot working decreased from 218 to 198kJmol−1 in the considered range of strain.…”
Get full text
Get full text
Get full text

Morphology, nucleation, and isothermal crystallization kinetics of poly(butylene succinate) mixed with a polycarbonate/MWCNTs masterbatch by Gumede, Thandi P.

“…The nanocomposites contained 0.5, 1.0, 2.0, and 4.0 wt% MWCNTs. Differential scanning calorimetry (DSC), small angle X-ray scattering (SAXS) and wide angle X-ray scattering (WAXS) results indicate that the blends are partially miscible, hence they form two phases (i.e., PC-rich and PBS-rich phases). …”
Get full text
Get full text

Deoxygenation of pyrolysis vapour derived from durian shell using catalysts prepared from industrial wastes rich in Ca, Fe, Si and Al by Tan, Y.L.

“…With same silica-to-alumina ratio, catalyst prepared from oil palm ash (AS-OPA) with lower Fe and Ca contents gave higher liquid yield (8.32 wt%) with alcohols (28.90%), hydrocarbons (46.00%), and nitrogen-containing compounds (21.46%) while catalyst prepared from electric arc furnace slag (AS-EAF) with higher Fe and Ca contents produced lower liquid yield (50.21 wt%) with high amount of esters (25.80%) and hydrocarbons (72.82%). …”
Get full text
Get full text