Microstructure, wear and corrosion characteristics of Cu matrix reinforced SiC–graphite hybrid composites by Jamwal A.

“…Copper matrix composites with SiC-graphite reinforcement (0, 2.5,5, 7.5 and 10 wt.%) were prepared by stir casting process. …”
Get full text
Get full text

Conversion of Organic Municipal Wastes into Biochars and their Effect on Fertility Parameters of Normal and Sabkha Soils of Qatar by Ahmedna, Mohamed

“…To each pot, sufficient amount of 0.25-mm sieved biochar was mixed with soil to yield carbon to soil ratios of 0, 1, and 2% (wt/wt). Box-Behnken experimental design was used instead of the full factorial to decrease the number of treatments to a manageable level (126 treatments) with three replications at the center. …”
Get full text
Get full text

Influence of nitrogen doping on the electrocatalytic activity of Ni-incorporated carbon nanofibers toward urea oxidation by Barakat, Nasser A.M.

“…However, the electrochemical measurements indicated that the content of the urea in the initial electrospun solution should be optimized as the results showed that the best nickel surface activation as well as the maximum observed current density can be achieved when the urea content is kept at 5 wt%. Typically, the observed current densities using 1.0 M urea (in 1 M KOH) were 3.15, 29.7, 13.75, 47.55, 14.13 and 9.85 mA/cm2 for the nanofibers obtained from electrospun solutions having 0, 1, 2, 5, 7 and 9 wt% urea, respectively. …”
Get full text
Get full text

Synthesis of High-Antifouling and Antibacterial Ultrafiltration Membranes Incorporating Low Concentrations of Graphene Oxide by Alkhouzaam, Abedalkader Ibraheem

“…The pure water permeability (PWP) decreased with loadings of GO from 181.7 L.m-2.h-1.bar-1 of pure PSF to 181.1 and 167.4 L.m-2.h-1.bar-1 with 0.02 and 0.1 wt.% GO respectively. …”
Get full text
Get full text

Isothermal crystallization kinetics and morphology of double crystalline PCL/PBS blends mixed with a polycarbonate/MWCNTs masterbatch by Gumede T.P.

“…For the nanocomposites, there was a decrease in Tc values. This was attributed to a competition between two effects: (1) The partial miscibility of the PC-rich and the PCL-rich and PBS-rich phases, and (2) the nucleation effect of the MWCNTs. …”
Get full text
Get full text

Deoxygenation of pyrolysis vapour derived from durian shell using catalysts prepared from industrial wastes rich in Ca, Fe, Si and Al by Tan, Y.L.

“…With same silica-to-alumina ratio, catalyst prepared from oil palm ash (AS-OPA) with lower Fe and Ca contents gave higher liquid yield (8.32 wt%) with alcohols (28.90%), hydrocarbons (46.00%), and nitrogen-containing compounds (21.46%) while catalyst prepared from electric arc furnace slag (AS-EAF) with higher Fe and Ca contents produced lower liquid yield (50.21 wt%) with high amount of esters (25.80%) and hydrocarbons (72.82%). …”
Get full text
Get full text

A lipidomic screen of hyperglycemia-treated HRECs links 12/15-Lipoxygenase to microvascular dysfunction during diabetic retinopathy via NADPH oxidase by Ibrahim, Ahmed S.

“…Fluorescein angiography and retinal albumin leakage showed a significant decrease in retinal hyperpermeability in streptozotocin-induced diabetic mice lacking 12/15-LOX compared with diabetic WT mice. …”
Get full text
Get full text

Propagation rate coefficient for sulfobetaine monomers by PLP-SEC by Lacík, Igor

“…The kp values are determined in aqueous solutions for monomer concentrations between 5 and 50 wt % and temperatures between 15 and 80 °C. The propagation rate for SBE is by about a factor of two higher than that for SBAm. …”
Get full text
Get full text

Date palm wood flour/glass fibre reinforced hybrid composites of recycled polypropylene: Mechanical and thermal properties by AlMaadeed, Mariam A.

“…Addition of as little 5wt% glass fibre to wood flour reinforced RPP increases the tensile strength by about 18% relative to the wood flour reinforcement alone. …”
Get full text
Get full text
Get full text

Morphology and property changes in PLA/PHBV blends as function of blend composition by Kanda G.S.

“…wt.% PHBV. For samples between 50/50 and 10/90 PLA/PHBV the tensile strength and Young?…”
Get full text
Get full text

Effect Of The Apical Ectodermal Ridge On Mitotic Index In Hind Limb Bud Mesenchyme In Bufo Regularis by Abdel Karim, Ahmed E.

“…The operated bud (80% of cases) showed a decrease in its volume and there was no significant difference in mesenchyme MI. …”
Get full text

Artificial weathering and accelerated heat aging studies on low-density polyethylene (Ldpe) produced via autoclave and tubular process technologies by Luyt, A. S.

“…Oligomeric or high molecular weight hindered amine light stabilizer (HALS), and two UV absorbers of benzophenone or hydroxyphenyl-triazine types were equally introduced to both the LDPE grades at a total content of 0.2 wt%. …”
Get full text
Get full text

Study of performance, combustion, and emissions parameters of DI-diesel engine fueled with algae biodiesel/diesel/n-pentane blends by Elkelawy, Medhat

“…Through performance tests, it was found that 15 ml of n-pentane per liter was the best addition as it caused an increase in the brake thermal efficiency of 7.1% and a decrease in brake specific fuel consumption of 6.4% compared to the elegant B50. …”
Get full text
Get full text

Uncovering the Epigenetic Contribution of Protein Arginine Methyltransferase 5 (PRMT5) during Zebrafish Cardiomyogenesis by Zakaria, Zain Zaki

“…This was accompanied by a moderate decrease in blood flow (20%), significantly higher decrease in general cardiac output (65%), and reduction in red blood cells count (50%). …”
Get full text

Phase change materials based on high-density polyethylene filled with microencapsulated paraffin wax by Krupa, Igor

“…A modified in situ polymerization microencapsulation procedure for the preparation of microcapsules with paraffin wax cores (43 wt.%) and melamine–formaldehyde resin shells having a uniform size distribution and a spherical shape with average diameters of approximately 15 μm was developed. …”
Get full text
Get full text

Effects of superelastic nano-NiTi additions on electroless Ni –P coating properties under bending by MacLean M.

Get full text
Get full text

Ni-P-TiO2 Composite coatings on copper produced by sol-enhanced electroplating by Wang, Yuxin

“…Ni-P-TiO2 composite coatings were prepared on copper substrate by TiO2 sol-enhanced electroplating. A systematic study of Ni-P-X coatings with different sol concentrations (TiO2 concentration X from 0 to 50 mL/L) has been conducted in order to understand the effect of TiO2 sol addition and the strengthening mechanism. …”
Get full text

Improved flexible, controlled dielectric constant material from recycled LDPE polymer composites by Noorunnisa Khanam, P.

“…In this study, recycled low density polyethylene (RLDPE) is developed with the addition of aluminum oxide (Al2O3) to have new polymer composites. The following wt% were used of the filler (1, 4 and 6 wt%). …”
Get full text
Get full text
Get full text

Nanocomposite Ni-TiO2 coatings produced by pulsed electroplating by Wang, Y.

“…Nanocomposite Ni-TiO2 coatings were prepared on mild steel substrate by pulse electroplating with controlled duty cycle and frequency. A systematic study of Ni-xTiO2 coatings with different TiO2 concentrations (x50-20 g L-1) has been conducted. …”
Get full text
Get full text

Synthesis and properties of HA/ZnO/CNT nanocomposite by Ding M.

Get full text
Get full text