Reactive Absorption of CO2 Using Ethylaminoethanol Promoted Aqueous Potassium Carbonate Solvent by Bhosale, Rahul Rambhau

Get full text
Get full text

Structural and mechanical characterization of stir cast Al–Al2O3–TiO2 hybrid metal matrix composites by Ahamad, N.

“…Aluminium matrix reinforced with aluminium oxide?titanium oxide (2.5, 5.0, 7.5 and 10 wt.%) in equal proportion were prepared by stir casting. …”
Get full text
Get full text

Biodegradable polysaccharide grafted polyacrylamide inhibitor for corrosion in CO2- saturated saline solution by Jalab, Rem

“…The steel resistance was diminished from 1436 to 355 Ω cm2 at 50 °C. Implementing AGGPAM coating reduced the steel corrosion rate to 9.6 mils per year, achieving 71% efficiency. …”
Get full text
Get full text

Tailoring electrocatalytic properties of Pt nanoparticles grown on Ti3C2Tx MXene surface by Filip, Jaroslav

Get full text
Get full text
Get full text

Synthesis and characterisation of Co2+-incorporated ZnO nanoparticles prepared through a sol-gel method by Ba-Abbad, Muneer M.

“…The band gap of the Co2+-doped ZnO samples decreased from 3.19 to 2.66 eV as the content of dopant Co2+ increased from 0.0 to 1.0 wt.%. …”
Get full text
Get full text

Correlation of structural and mechanical properties for Al-Al2O3-SiC hybrid metal matrix composites by Ahamad, Naseem

“…Al2O3-SiC (2.5 wt.%, 5.0 wt.%, 7.5 wt.% and 10.0 wt.%) in relative and symmetrical proportion. …”
Get full text
Get full text

ELECTRODE SUSPENSION FOR AQUEOUS SODIUM FLOW BATTERY by MESLAM, MENTALLAH MOHAMED HASSANIN MOHAMED HASSANIN

Get full text

Thermal characterization of phase change materials based on linear low-density polyethylene, paraffin wax and expanded graphite by Sobolciak, Patrik

Get full text
Get full text

Thermally conductive polyethylene/expanded graphite composites as heat transfer surface: Mechanical, thermo-physical and surface behavior by Sobolčiak, Patrik

“…Composites of high-density polyethylene (HDPE) and expanded graphite (EG) are prepared for heat exchangers in multi-effect distillation (MED) desalination. At 50 wt.% EG loading, the thermal conductivity of HDPE was increased by 372%. …”
Get full text
Get full text

Mechanical Performance and Thermo-Physical Properties of Cement Mortar Incorporating Hybrid Slags by Baawain, Mahad

“…This study investigates the mechanical and thermal properties of cement mortars incorporating two types of waste slags. Ferrochrome (FeCr) slag aggregate was used as a replacement for sand at the ratios of 25, 50, 75 and 100 wt. %. …”
Get full text
Get full text

Relationship between fat distribution, iron status, and hepcidin in Qatari obese adults by Abdelhamid, kerkadi

Get full text
Get full text

Improved mechanical properties of recycled linear low-density polyethylene composites filled with date palm wood powder by AlMaadeed, Mariam A.

“…The presence of filler increased the flexural strength from 11.4MPa for unmodified RLLDPE to 17MPa for the composite containing 70wt.% filler. The Young’s modulus and stress at break measured at 50°C decreased significantly compared with those values measured at 25°C. …”
Get full text
Get full text
Get full text

Natural aging of shape stabilized phase change materials based on paraffin wax by Krupa, Igor

Get full text
Get full text

Investigation of the rheological properties of nanosilica-reinforced polyacrylamide/polyethyleneimine gels for wellbore strengthening at high reservoir temperatures by Shamlooh M.

“…The strongest gel was formed with the addition of 2 wt % of 50 nm silica to the polymer base solution which enhanced the gel strength by more than 300%. …”
Get full text
Get full text

Synthesis of High-Antifouling and Antibacterial Ultrafiltration Membranes Incorporating Low Concentrations of Graphene Oxide by Alkhouzaam, Abedalkader Ibraheem

“…The pure water permeability (PWP) decreased with loadings of GO from 181.7 L.m-2.h-1.bar-1 of pure PSF to 181.1 and 167.4 L.m-2.h-1.bar-1 with 0.02 and 0.1 wt.% GO respectively. …”
Get full text
Get full text

Conversion of Organic Municipal Wastes into Biochars and their Effect on Fertility Parameters of Normal and Sabkha Soils of Qatar by Ahmedna, Mohamed

Get full text
Get full text

Deoxygenation of pyrolysis vapour derived from durian shell using catalysts prepared from industrial wastes rich in Ca, Fe, Si and Al by Tan, Y.L.

“…With same silica-to-alumina ratio, catalyst prepared from oil palm ash (AS-OPA) with lower Fe and Ca contents gave higher liquid yield (8.32 wt%) with alcohols (28.90%), hydrocarbons (46.00%), and nitrogen-containing compounds (21.46%) while catalyst prepared from electric arc furnace slag (AS-EAF) with higher Fe and Ca contents produced lower liquid yield (50.21 wt%) with high amount of esters (25.80%) and hydrocarbons (72.82%). …”
Get full text
Get full text

Propagation rate coefficient for sulfobetaine monomers by PLP-SEC by Lacík, Igor

“…The kp values are determined in aqueous solutions for monomer concentrations between 5 and 50 wt % and temperatures between 15 and 80 °C. The propagation rate for SBE is by about a factor of two higher than that for SBAm. …”
Get full text
Get full text

Morphology and property changes in PLA/PHBV blends as function of blend composition by Kanda G.S.

“…wt.% PHBV. For samples between 50/50 and 10/90 PLA/PHBV the tensile strength and Young?…”
Get full text
Get full text

Enhancing the corrosion resistance of reinforcing steel under aggressive operational conditions using behentrimonium chloride by Radwan A.B.

“…Aggressive operational conditions e.g. saline media and acidic gases, e.g., CO2 can increase the corrosion rate of reinforcing steel. …”
Get full text
Get full text