ELECTRODE SUSPENSION FOR AQUEOUS SODIUM FLOW BATTERY by MESLAM, MENTALLAH MOHAMED HASSANIN MOHAMED HASSANIN

Get full text

Thermal characterization of phase change materials based on linear low-density polyethylene, paraffin wax and expanded graphite by Sobolciak, Patrik

“…A similar decrease in sensible heat with increased loading of EG was observed for PCMs containing 50 wt.% of EG. …”
Get full text
Get full text

Enhanced quality factor of polyvinyl formal (PVF) based nanocomposites filled with zinc oxide and carbon black nanoparticles for wireless sensing applications by Mohanapriya, M.K.

“…The incorporation of ZnO at 10% decreases Q-factor to 36.1. Incorporation of CBNP at 5% and ZnO at 5% further reduces the Q-factor to 13.7. …”
Get full text
Get full text

Synthesis and characterisation of Co2+-incorporated ZnO nanoparticles prepared through a sol-gel method by Ba-Abbad, Muneer M.

“…The band gap of the Co2+-doped ZnO samples decreased from 3.19 to 2.66 eV as the content of dopant Co2+ increased from 0.0 to 1.0 wt.%. …”
Get full text
Get full text

Investigating the effect of polymer-modified graphene oxide coating on RO membrane fouling by Ashfaq, Mohammad Y.

“…The membrane surface characterization showed a decrease in membrane surface roughness from 74.7 nm to 69.0 nm and an increase in membrane hydrophilicity as the contact angle decreased from 41.7 ± 4.50 to 22.0 ± 1.10. …”
Get full text
Get full text

Correlation of structural and mechanical properties for Al-Al2O3-SiC hybrid metal matrix composites by Ahamad, Naseem

“…Al-Al2O3-SiC hybrid composite has been developed through stir casting with addition of ceramics i.e. Al2O3-SiC (2.5 wt.%, 5.0 wt.%, 7.5 wt.% and 10.0 wt.%) in relative and symmetrical proportion. …”
Get full text
Get full text

Investigation of the rheological properties of nanosilica-reinforced polyacrylamide/polyethyleneimine gels for wellbore strengthening at high reservoir temperatures by Shamlooh M.

“…The objective of this work is to investigate the effect of nanosilica sizes (8, 20, 50, and 85 nm) and concentrations (0.1–2 wt %) on the stability and viscoelastic behavior of polyacrylamide (PAM) cross-linked with polyethyleneimine (PEI) at 130 °C. …”
Get full text
Get full text

Improved mechanical properties of recycled linear low-density polyethylene composites filled with date palm wood powder by AlMaadeed, Mariam A.

“…The presence of filler increased the flexural strength from 11.4MPa for unmodified RLLDPE to 17MPa for the composite containing 70wt.% filler. The Young’s modulus and stress at break measured at 50°C decreased significantly compared with those values measured at 25°C. …”
Get full text
Get full text
Get full text

Natural aging of shape stabilized phase change materials based on paraffin wax by Krupa, Igor

“…Firstly, EG suppressed leakage of paraffin wax from the compact shape of SSPCMs. The addition of 15 wt% of EG to shape stabilized phase change materials (SSPCMs) containing 50 wt% of wax caused a decreasing in the leakage of wax by 50% over 210 days of natural aging. …”
Get full text
Get full text

Synthesis of High-Antifouling and Antibacterial Ultrafiltration Membranes Incorporating Low Concentrations of Graphene Oxide by Alkhouzaam, Abedalkader Ibraheem

“…The pure water permeability (PWP) decreased with loadings of GO from 181.7 L.m-2.h-1.bar-1 of pure PSF to 181.1 and 167.4 L.m-2.h-1.bar-1 with 0.02 and 0.1 wt.% GO respectively. …”
Get full text
Get full text

Morphology and property changes in PLA/PHBV blends as function of blend composition by Kanda G.S.

Get full text
Get full text

Structural and mechanical characterization of stir cast Al–Al2O3–TiO2 hybrid metal matrix composites by Ahamad, N.

“…Aluminium matrix reinforced with aluminium oxide?titanium oxide (2.5, 5.0, 7.5 and 10 wt.%) in equal proportion were prepared by stir casting. …”
Get full text
Get full text

Conversion of Organic Municipal Wastes into Biochars and their Effect on Fertility Parameters of Normal and Sabkha Soils of Qatar by Ahmedna, Mohamed

Get full text
Get full text

Deoxygenation of pyrolysis vapour derived from durian shell using catalysts prepared from industrial wastes rich in Ca, Fe, Si and Al by Tan, Y.L.

“…With same silica-to-alumina ratio, catalyst prepared from oil palm ash (AS-OPA) with lower Fe and Ca contents gave higher liquid yield (8.32 wt%) with alcohols (28.90%), hydrocarbons (46.00%), and nitrogen-containing compounds (21.46%) while catalyst prepared from electric arc furnace slag (AS-EAF) with higher Fe and Ca contents produced lower liquid yield (50.21 wt%) with high amount of esters (25.80%) and hydrocarbons (72.82%). …”
Get full text
Get full text

Enhancing the corrosion resistance of reinforcing steel under aggressive operational conditions using behentrimonium chloride by Radwan A.B.

“…Using only a 50 ?mol L?1 of BTC, we are able to measure an inhibition efficiency of 91, 79, and 71% in SCP solution with 3.5% NaCl at pH of 12.5, 10 and 7, respectively without showing any effect on the mechanical properties on the cured mortars. …”
Get full text
Get full text

Combined effects of treated domestic wastewater, fly ash, and calcium nitrite toward concrete sustainability by Abushanab, Abdelrahman

Get full text
Get full text

Biodegradable polysaccharide grafted polyacrylamide inhibitor for corrosion in CO2- saturated saline solution by Jalab, Rem

“…Lastly, potentiostatic testing of steel with AGGPAM at an applied potential of 50 mV illustrated surface protection and decreased current over a prolonged time. …”
Get full text
Get full text

The effects of gas tungsten arch welding on the corrosion and mechanical properties of AA 6061 T6 by Eltai, Elsadig

Get full text
Get full text

Influence of adhesive thickness and filler content on the mechanical performance of aluminum single-lap joints bonded with aluminum powder filled epoxy adhesive by Kahraman, R.

Get full text
Get full text

Arabic gum as green agent for ZnO nanoparticles synthesis: properties, mechanism and antibacterial activity by Ba-Abbad, Muneer M.

“…The size of the spherically shaped ZnO NPs decreased with an increase in the amount of Arabic gum, up to an optimal 1.50 wt%. …”
Get full text
Get full text