Novel Concrete Mix for 3D Concrete Printing with Special Functions by Malek Omar Mohammad (20433575)

“…To address some of the limitations of conventional concrete construction, the proposed research develops a novel concrete material that possesses better thermal insulation properties, which can decrease energy consumption during the building’s operational phase, and is applicable for 3D concrete printing (3DCP), which removes the need for formwork, increases building design flexibility, and can improve the environmental effect. …”

3D Tissue-Engineered Vascular Drug Screening Platforms: Promise and Considerations by Isra Marei (11312895)

“…A novel approach is to develop 3D tissue engineered miniaturized constructs in vitro that are based on human cells. …”

3D printing of circular materials: Comparative environmental analysis of materials and construction techniques by Shoukat Alim Khan (14778226)

“…<p>The use of 3D printing in construction activities can help to reduce waste, lower energy consumption, and minimize the environmental impact of building projects. …”

3D Concrete Printing Sustainability: A Comparative Life Cycle Assessment of Four Construction Method Scenarios by Malek Mohammad (17150977)

Magnesium-reinforced PMMA composite scaffolds: Synthesis, characterization, and 3D printing <i>via</i> stereolithography by Ambreen Afridi (22224310)

“…To evaluate their printability and the effect of different material compositions on the 3D-printed structures, PMMA resin was mixed with high-weight percentages (wt%) of Mg alloy WE43. …”

3D FEM Model on the Parameters’ Influence of EPB-TBM on Settlements of Single and Twin Metro Tunnels During Construction by Masoud Forsat (14158980)

Performance evaluation of 3D-printed PLA composites doped with WE43 magnesium alloy for bone tissue engineering applications by Sumama Nuthana Kalva (17302906)

“…<p>This study presents a comprehensive performance evaluation of 3D-printed PLA/WE43 magnesium alloy composites, offering novel insights into composition–structure–function relationships for bone tissue engineering. …”

Effect of Mg incorporation on the properties of PCL/Mg composites for potential tissue engineering applications by Sumama Nuthana Kalva (19206064)

“…This study investigates the influence of Mg incorporation on the properties of PCL/Mg composites, aiming to evaluate their suitability for 3D-printable (3DP) tissue engineering applications. …”

Correlating the rheological and magneto-optical properties of cobalt substituted magnetite ferrofluids (Co_xFe_1−xFe₂O₄) with theoretical... by Blessy Babukutty (17871482)

“…An environmental friendly method of co-precipitation is applied to generate Co_xFe_1−xFe₂O₄ with variable dopant concentration (x = 0–0.8), which is deeply investigated by structural and functional property analyses of the ferrofluids. …”

Removal of Benzene and Toluene from Synthetic Wastewater by Adsorption onto Magnetic Zeolitic Imidazole Framework Nanocomposites by George Z. Kyzas (740387)

“…Thus, by performing the present study, the potential of Fe₃O₄/zeolite imidazolate framework nanoparticles (Fe₃O₄@ZIF-8) was evaluated for the adsorption of benzene and toluene. …”

A new insight into the separation of oil from oil/water emulsion by Fe₃O₄–SiO₂ nanoparticles by Wamda Faisal Elmobarak (17058024)

“…For the oil recovery process, the Fe₃O₄ was applied for the inhibition (i.e., decrease) of oil sedimentation, and the SiO₂ NPs were applied for wettability alteration and IFT reduction. …”

Application of Fe₃O₄ magnetite nanoparticles grafted in silica (SiO₂) for oil recovery from oil in water emulsions by Wamda Faisal Elmobarak (17058024)

“…<p dir="ltr">In this study, an innovative magnetic demulsifier (MD) was prepared by grafting a silica layer onto the surface of the Fe₃O₄ magnetic nanoparticles (MNPs) using the modified Stober process. …”

Application of Zn-ferrite towards thermochemical utilization of carbon dioxide: A thermodynamic investigation by Rahul R. Bhosale (6467102)

“…The decrease in the reduction temperature is significant when the ratio of the molar flow rate of inert sweep gas to the molar flow rate of ZnFe₂O₄ increases from 10 to 30. …”

Insights on the effect of water content in carburizing gas mixtures on the metal dusting corrosion of iron by El Tayeb Bentria (9904024)

“…At later stage, the formation of oxide scale leads to an elevated concentration of H₂O/OH molecules on the surface due to the decrease in Fe affinity to dissociate water. This results into blocking the Fe catalytic sites leading to lower C and O diffusion to the bulk of the sample.…”

Ferroelectric Properties and Electrocaloric Effect in Dy2O3 Substitution on Lead-Free (Na0.5 Bi0.5)0.94 Ba0.06TiO3 Ceramic by Turki, O.

“…Higher stability of the ferroelectric (FE) phase was obtained at room temperature for the compositions y = 0.01, 0.02 and 0.05, with optimum values for y = 0.02 as remanent polarization Pr = 32µC/cm2, as well as piezoelectric coefficients d33 = 137 pC/N, kp = 0.27 and kt = 0.16, whereas a higher content of Dy (y = 0.08) induced a remarkable decrease of the ferroelectric and piezoelectric properties. …”
Get full text

IoT‐based mock oxygenator for extracorporeal membrane oxygenation simulator by Aya Sayed (14779249)

“…</p> <h3> Results</h3> <p>The initial model was reproduced using 3D modeling and printing. Additionally, the mock oxygenator could mimic frequent events such as pump noise and clotting. …”

Novel Wire Gripper for Robotics Picking of Small Green Parts From Powder Bed of Binder Jet Metal Additive Manufacturing by Abdulhamid Mathkur (22467373)

“…<p dir="ltr">The production revolution has materialized through Binder jet metal 3D printing because this technology creates detailed customized parts efficiently. …”

Control of the Speed of a Light-Induced Spin Transition through Mesoscale Core-Shell Architecture by Slimani, Ahmed

“…A series of photomagnetic coordination polymer core-shell heterostructures, based on the light-switchable RbaCob[Fe(CN)6]c·mH2O (RbCoFe-PBA) as core with the isostructural KjNik[Cr(CN)6]l·nH2O (KNiCr-PBA) as shell, are studied using temperature-dependent powder X-ray diffraction and SQUID magnetometry. …”
Get full text
Get full text

Enhanced oil recovery using hyperbranched polyglycerol polymer-coated silica nanoparticles by Wamda Faisal Elmobarak (17058024)

“…<p dir="ltr">Functionalized Fe₃O₄–SiO₂ magnetic nanoparticles (Fe–Si-MNPs) coated with hyperbranched polyglycerol polymer were prepared and tested for oil recovery from oil in water (O/W) emulsions. …”

Recyclable polyaspartate-coated magnetic nanoparticles for sustainable control of calcite and barite scales in oilfield operations by Abdelrahman T. Abdelaal (14674629)

“…<p dir="ltr">Scale formation is a major challenge in hydrocarbon production, leading to decreased efficiency, equipment damage, and increased operational costs. …”