Oil-Resistant Underoil Superhydrophilic Metallic Foams for Lampblack Prefiltration by Junxu Chen (5324705)

“…Superwetting/repelling coatings have been utilized to address the issue of oil contamination on lampblack prefiltration metallic foam by both academia and industry. Nevertheless, the widely adopted superamphiphobic coatings are currently costly and suffer from poor wear resistance. …”

Oil-Resistant Underoil Superhydrophilic Metallic Foams for Lampblack Prefiltration by Junxu Chen (5324705)

“…Superwetting/repelling coatings have been utilized to address the issue of oil contamination on lampblack prefiltration metallic foam by both academia and industry. Nevertheless, the widely adopted superamphiphobic coatings are currently costly and suffer from poor wear resistance. …”

Effect of the Microstructure on the Wear Resistance of a Pearlitic Steel by A.P.G. Chaves (10443314)

“…It was found that the wear resistance increases with decreasing the interlamellar spacing, fine pearlite showed 30% lower mass loss than coarse pearlite. …”

Improvement of the abrasive wear resistance of an Fe-Cr-Mn-C coating through V addition by Manuel Rodríguez Pérez (6721202)

“…<p></p><p>ABSTRACT The aim of this work is to increase the abrasive wear resistance of a coating, applied on plates of AISI 1020 carbon steel, using tubular coated electrodes with the Fe-Cr-Mn-C alloy system. …”

Wear quality of 17-4PH-xTiC coatings after friction wear tests. by Dian Yu Luo (22656111)

Subjects:

Microstructure and Wear Resistance of ZrC-ZrB2 /Ni Composite Coatings Prepared by Plasma Transferred Arc Cladding by Tian-guo Guan (6675545)

“…The coatings had a sound metallurgical bonding to the SA-283C steel substrate. Microhardness and wear resistance of the substrate were greatly improved by the composite coatings, and both of them showed a tendency to increase first and then decrease with the increase of the Ni content. …”

The influence of Cu content on high temperature corrosion behavior of heat - resistant molten salt steel by Hong Li (20183)

“…The structure of the oxide film consists of various protective oxide films; with increasing of Cu content, the high-temperature corrosion resistance of heat-resistant steel was improved and the thickness of the corrosion layer was decreased which led to improving the bonding strength between the inner layer and the matrix. …”

Thermal and Mechanical Properties of Vinyltrimethoxysilane (VTMOS) Crosslinked High Molecular Weight Polyethylene (HMWPE) by Marisa Cristina Guimarães Rocha (7394711)

“…The results obtained showed that the introduction of crosslinks improved the wear resistance of HMWPE. However, the HMWPE crosslinking led to a significant decrease in the Young’s Modulus, as a result of the reduction in crystallinity or the heterogeneous structure of the crosslinked samples. …”

Comparison of wear quality of different blades after field tests. by Dian Yu Luo (22656111)

Subjects:

Effect of Solid Solution Temperature on Microstructure and Corrosion Resistance of CoNiCrMo Alloy by Ya-jie Chu (7576961)

Metallographic organization of 17-4PH-xTiC coatings. by Dian Yu Luo (22656111)

Subjects:

Macroscopic morphology of 17-4PH-xTiC coatings. by Dian Yu Luo (22656111)

Subjects:

Hardness distribution of 17-4PH-xTiC coatings cross section. by Dian Yu Luo (22656111)

Subjects:

(a) The installation method of blade holder, (b) Blades in operation, (c) The blade after 120h of wheat harvesting. by Dian Yu Luo (22656111)

Subjects:

SEM morphology of power: (a)17−4PH; (b)TiC. by Dian Yu Luo (22656111)

Subjects:

SEM morphology of 17-4PH-xTiC coatings. by Dian Yu Luo (22656111)

Subjects:

SEM morphology and EDS surface-scanning energy spectra of 17-4PH-xTiC coated abrasion marks: (a) 10%TiC; (b) 20%TiC; (c) 30%TiC; (d) 40%TiC. by Dian Yu Luo (22656111)

Subjects:

Schematic of experimental equipment and process. by Dian Yu Luo (22656111)

Subjects:

SEM morphology and EDS surface-scanning energy spectra of the cross-sectional organization of 17-4PH-xTiC coatings. by Dian Yu Luo (22656111)

Subjects:

Unmolten particles in the coating. by Dian Yu Luo (22656111)

Subjects: