Strengthening of reinforced concrete beams in shear using different steel reinforced grout techniques by Tadesse G. Wakjira (14779165)

“…<p></p><div> <p>In this study, steel reinforced grout (SRG) is proposed for shear strengthening of reinforced concrete (RC) beams using the near-surface embedded (NSE) technique. …”

Chitosan/Lignosulfonate Nanospheres as “Green” Biocide for Controlling the Microbiologically Influenced Corrosion of Carbon Steel by Pathath Abdul Rasheed (16846898)

“…<p dir="ltr">In this work, uniform cross-linked chitosan/lignosulfonate (CS/LS) nanospheres with an average diameter of 150–200 nm have been successfully used as a novel, environmentally friendly biocide for the inhibition of mixed sulfate-reducing bacteria (SRB) culture, thereby controlling microbiologically influenced corrosion (MIC) on carbon steel. It was found that 500 µg·mL−1 of the CS/LS nanospheres can be used efficiently for the inhibition of SRB-induced corrosion up to a maximum of 85% indicated by a two fold increase of charge transfer resistance (Rct) on the carbon steel coupons. …”

Green Inhibition of Mild Steel Corrosion in a CO2 Saturated Saline Solution by Gomes, Elron Edgar

Get full text

Corrosion Behaviour of 316L Stainless Steel in CNTs–Water Nanofluid: Effect of Temperature by Dana H. Abdeen (16489418)

“…Thereby, 316L stainless steel samples were exposed to CNTs–water nanofluid under temperatures of 22, 40, 60 and 80 °C. …”

Retrofitting of Composite Steel Beams Pre-Damaged in Flexure using Fiber Reinforced Polymers by Karam, Ehab Clovis

Get full text

Effect of Concrete Type on Flexural Behavior of Concrete Beams Reinforced with HSS Bars by Aldabagh, Saif Maad

Get full text

Corrosion Inhibition of Mild Steel using Potato Peel Extract in 2M HCl Solution by Ibrahim, Taleb

“…The results showed increase in the inhibition efficiency with increasing potato peels extract concentration. …”
Get full text

Enhancing the corrosion resistance of reinforcing steel under aggressive operational conditions using behentrimonium chloride by A. Bahgat Radwan (9631720)

“…., CO₂ can increase the corrosion rate of reinforcing steel. Accordingly, the necessity to protect the steel under the above conditions without affecting the mechanical properties of the concrete is growing. …”

Corrosion Evaluation of 316L Stainless Steel in CNT-Water Nanofluid: Effect of CNTs Loading by Dana H. Abdeen (18174166)

“…<p dir="ltr">Polarization resistance and potentiodynamic scan testing were performed on 316L stainless steel (SS) at room temperature in carbon nanotube (CNT)-water nanofluid. …”

Fracture Behavior of ASTM A633 steel plate specimens with edge crack at tensile test by Abi Shdid, Caesar

“…The tensile test is an important and widely used test to determine the mechanical properties of steel materials. In tensile test, a specimen is pulled and specimen deformation and applied load is recorded until its fracture to draw load-displacement curve. …”
Get full text
Get full text
Get full text

Evaluation of the durability and shielding properties of high-strength concrete incorporating locally available materials and carbon additives by Othman, Obaida

“…However, the addition of carbon materials along with steel fibers (FCLDUNE) decreased these strengths by 19.6 and 15%, and increased shrinkage and creep by 18 and 9%, respectively. …”
Get full text

Evaluations of Sustainable Concepts in Civil Engineering Program by Al-Tamimi, Adil

“…Materials are one of the areas that need sustainability in an integrated manner. Concrete and steel structures in addition to water resources and solid waste are most commonly managed by civil engineers. …”
Get full text

A Novel Steel Reinforcement Scheme for 3D Printed Concrete Beams: A Study on Shear Behaviour by Khalifa, Mohamed Ashraf

Get full text

Changing life expectancy in European countries 1990–2021: a subanalysis of causes and risk factors from the Global Burden of Disease Study 2021 by Nicholas, Steel

“…By contrast, countries with the greatest slowdown in life expectancy improvements after 2011 went on to have some of the largest decreases in life expectancy in 2019–21. …”
Get full text
Get full text
Get full text

Role of cementite morphology on corrosion layer formation of high-strength carbon steels in sweet and sour environments by Shabnam Karimi (19457575)

“…<p dir="ltr">The effect of cementite morphology on the corrosion layer formation of four high-strength carbon steels was studied in an aqueous solution containing CO₂ and CO₂ / H₂S . …”

Electrochemical and thermodynamic study on the corrosion performance of API X120 steel in 3.5% NaCl solution by Khuram Shahzad (575887)

“…Moreover, PEI inhibition mechanism is based on its CO₂ capturing ability and the PEI adsorption on the steel surface beside the siderite layer which give the PEI molecules the ability to reduce the scale formation and increase the corrosion protection due to capturing the CO₂ from the brine solution.…”

3D Printable Ca(OH)₂-based geopolymer concrete with steel fiber reinforcement by Youssef Mortada (16810656)

“…<p dir="ltr">This study investigates the impact of varying steel fiber (SF) content (0%, 0.8%, 1.0%, and 1.2% by volume) on the mechanical and durability properties of 3D-printed Ca(OH)₂-activated geopolymer concrete (GPC). …”

Enhancement of the corrosion resistance of mild steel with femtosecond laser- nanostructuring and CrCoNi medium entropy alloy coating by Ahmad, Shahbaz

“…In this work, the corrosion resistance of mild steel surface nanostructured with a femtosecond laser and coated with high corrosion resistant CrCoNi (CCN) medium entropy alloy through magnetron sputtering is studied. …”
Get full text

Effect of Girder Damage on the Structural Behavior of Slab-on-Girder Bridges by Elozn, Ahmed E.

Get full text

Towards Industry 4.0 and Sustainable Manufacturing Applying Environmentally Friendly Machining of a Precipitation Hardened Stainless Steel Using Hot Turning Process by Mohammadjafar Hadad (17541345)

“…In this research, the conventional and hot turning of AISI630 hardened stainless steel have been investigated using PVD-(Ti,Al)N/(Al,Cr)₂O₃ coated carbide cutting tools at various feed rates and cutting speeds. …”