Comparison COP of our study with Florides et al. by Mohammed Qasim Shaheen (21417079)

“…The results show a COP of 0.79 with a cooling capacity of 5 kW at generator, condenser, evaporator, and absorber temperatures of (90, 40, 10, and 35), respectively. The COP increases as the evaporator temperature increases, and it decreases as the condenser and absorber temperature increases. …”

Effect of generator temperature on COP. by Mohammed Qasim Shaheen (21417079)

“…The results show a COP of 0.79 with a cooling capacity of 5 kW at generator, condenser, evaporator, and absorber temperatures of (90, 40, 10, and 35), respectively. The COP increases as the evaporator temperature increases, and it decreases as the condenser and absorber temperature increases. …”

Emission factors. by Mohammed Qasim Shaheen (21417079)

“…The results show a COP of 0.79 with a cooling capacity of 5 kW at generator, condenser, evaporator, and absorber temperatures of (90, 40, 10, and 35), respectively. The COP increases as the evaporator temperature increases, and it decreases as the condenser and absorber temperature increases. …”

Magnitude of emission reduction. by Mohammed Qasim Shaheen (21417079)

“…The results show a COP of 0.79 with a cooling capacity of 5 kW at generator, condenser, evaporator, and absorber temperatures of (90, 40, 10, and 35), respectively. The COP increases as the evaporator temperature increases, and it decreases as the condenser and absorber temperature increases. …”

Assumed conditions. by Mohammed Qasim Shaheen (21417079)

“…The results show a COP of 0.79 with a cooling capacity of 5 kW at generator, condenser, evaporator, and absorber temperatures of (90, 40, 10, and 35), respectively. The COP increases as the evaporator temperature increases, and it decreases as the condenser and absorber temperature increases. …”

Fixed simulation data. by Mohammed Qasim Shaheen (21417079)

“…The results show a COP of 0.79 with a cooling capacity of 5 kW at generator, condenser, evaporator, and absorber temperatures of (90, 40, 10, and 35), respectively. The COP increases as the evaporator temperature increases, and it decreases as the condenser and absorber temperature increases. …”

pone.0324800.t002 - by Mohammed Qasim Shaheen (21417079)

“…The results show a COP of 0.79 with a cooling capacity of 5 kW at generator, condenser, evaporator, and absorber temperatures of (90, 40, 10, and 35), respectively. The COP increases as the evaporator temperature increases, and it decreases as the condenser and absorber temperature increases. …”

Impact of heat exchanger effectiveness on COP. by Mohammed Qasim Shaheen (21417079)

“…The results show a COP of 0.79 with a cooling capacity of 5 kW at generator, condenser, evaporator, and absorber temperatures of (90, 40, 10, and 35), respectively. The COP increases as the evaporator temperature increases, and it decreases as the condenser and absorber temperature increases. …”

Assumed conditions. by Mohammed Qasim Shaheen (21417079)

“…The results show a COP of 0.79 with a cooling capacity of 5 kW at generator, condenser, evaporator, and absorber temperatures of (90, 40, 10, and 35), respectively. The COP increases as the evaporator temperature increases, and it decreases as the condenser and absorber temperature increases. …”

Assumed conditions. by Mohammed Qasim Shaheen (21417079)

“…The results show a COP of 0.79 with a cooling capacity of 5 kW at generator, condenser, evaporator, and absorber temperatures of (90, 40, 10, and 35), respectively. The COP increases as the evaporator temperature increases, and it decreases as the condenser and absorber temperature increases. …”

S1 Table - by Jiajun Zeng (8854859)

“…The results showed that throughout the entire experimental process, the hydraulic pressure remained continuously stable, with a decrease of only 0.14%; The variation pattern of peak strength of fissured rock mass with increasing crack inclination angle under stable hydraulic pressure changes from a decrease and then an increase in the absence of hydraulic pressure to an increasing trend; The crack propagation length of low angle fissured rock mass is generally higher than that of high angle fissured specimens. …”

Characteristic curve of damage variable stage. by Jiajun Zeng (8854859)

“…The results showed that throughout the entire experimental process, the hydraulic pressure remained continuously stable, with a decrease of only 0.14%; The variation pattern of peak strength of fissured rock mass with increasing crack inclination angle under stable hydraulic pressure changes from a decrease and then an increase in the absence of hydraulic pressure to an increasing trend; The crack propagation length of low angle fissured rock mass is generally higher than that of high angle fissured specimens. …”

Stress-strain and hydraulic pressure curves. by Jiajun Zeng (8854859)

“…The results showed that throughout the entire experimental process, the hydraulic pressure remained continuously stable, with a decrease of only 0.14%; The variation pattern of peak strength of fissured rock mass with increasing crack inclination angle under stable hydraulic pressure changes from a decrease and then an increase in the absence of hydraulic pressure to an increasing trend; The crack propagation length of low angle fissured rock mass is generally higher than that of high angle fissured specimens. …”

CAD drawing of sealing fixture. by Jiajun Zeng (8854859)

“…The results showed that throughout the entire experimental process, the hydraulic pressure remained continuously stable, with a decrease of only 0.14%; The variation pattern of peak strength of fissured rock mass with increasing crack inclination angle under stable hydraulic pressure changes from a decrease and then an increase in the absence of hydraulic pressure to an increasing trend; The crack propagation length of low angle fissured rock mass is generally higher than that of high angle fissured specimens. …”

Infection-mediated changes in transcripts related to thrombosis, coagulation and platelet-leukocyte interactions in platelets and leukocytes. by Heather Learnard (22075952)

Subject’s characteristics (mean ± SD). by Magdalena Podczarska-Głowacka (21560120)

The mean scores of epidermis and dermis healing processes in burned rats after 10 and 21 days treatment with silver sulfadiazine 1% (silver), opium 0.05% (OP 0.05%), opium 0.5% (OP... by Omid Mehrpour (9385929)

Flowchart of literature screening process. by Shangtian Wang (20933822)

Subjects:

The details of literature inclusion and exclusion. by Shangtian Wang (20933822)

Subjects:

Basic characteristics of included literature. by Shangtian Wang (20933822)

Subjects: