DataSheet1_Reduce the application of phosphorus fertilizer in peanut fields and improve its efficiency by using iron modified biochar to adsorb phosphorus recovery products.docx by Junxiao Zhang (421908)

“…After the fifth desorption and recycling process, the adsorption capacity of the biochar decreased to 24%. The peanut yield in the FeB-P1 treatment was 50.8% higher than that in the FeBP-P2 treatment. …”

ABM NetLogo File. by Alexandra M. Campbell (3284094)

Flow chart of the study design. by Ramita Gupta (21512558)

“…Goalkeepers showed modest, non-significant improvements. Significant positional differences were identified for VJH and power output (p < 0.001).…”

LSTM model. by Longfei Gao (698900)

“…According to the experimental results, when the grinding depth increases to 21 μm, the average training loss of the model further decreases to 0.03622, and the surface roughness Ra value significantly decreases to 0.1624 μm. …”

CNN model. by Longfei Gao (698900)

“…According to the experimental results, when the grinding depth increases to 21 μm, the average training loss of the model further decreases to 0.03622, and the surface roughness Ra value significantly decreases to 0.1624 μm. …”

Ceramic bearings. by Longfei Gao (698900)

“…According to the experimental results, when the grinding depth increases to 21 μm, the average training loss of the model further decreases to 0.03622, and the surface roughness Ra value significantly decreases to 0.1624 μm. …”

Geometric contact arc length model. by Longfei Gao (698900)

“…According to the experimental results, when the grinding depth increases to 21 μm, the average training loss of the model further decreases to 0.03622, and the surface roughness Ra value significantly decreases to 0.1624 μm. …”

Indentation fracture mechanics model. by Longfei Gao (698900)

“…According to the experimental results, when the grinding depth increases to 21 μm, the average training loss of the model further decreases to 0.03622, and the surface roughness Ra value significantly decreases to 0.1624 μm. …”

Grinding particle cutting machining model. by Longfei Gao (698900)

“…According to the experimental results, when the grinding depth increases to 21 μm, the average training loss of the model further decreases to 0.03622, and the surface roughness Ra value significantly decreases to 0.1624 μm. …”

Three stages of abrasive cutting process. by Longfei Gao (698900)

“…According to the experimental results, when the grinding depth increases to 21 μm, the average training loss of the model further decreases to 0.03622, and the surface roughness Ra value significantly decreases to 0.1624 μm. …”

CNN-LSTM action recognition process. by Longfei Gao (698900)

“…According to the experimental results, when the grinding depth increases to 21 μm, the average training loss of the model further decreases to 0.03622, and the surface roughness Ra value significantly decreases to 0.1624 μm. …”

Mineral component content. by Chuan Li (158692)

“…As the temperature increases, the proportion of tensile cracks decreases, while shear cracks become more prevalent. …”

Micro-parameters of the numerical model. by Chuan Li (158692)

“…As the temperature increases, the proportion of tensile cracks decreases, while shear cracks become more prevalent. …”

Microcracks on the surface of the coal sample. by Chuan Li (158692)

“…As the temperature increases, the proportion of tensile cracks decreases, while shear cracks become more prevalent. …”

Flowchart of the test. by Chuan Li (158692)

“…As the temperature increases, the proportion of tensile cracks decreases, while shear cracks become more prevalent. …”

Distribution of thermal cracks. by Chuan Li (158692)

“…As the temperature increases, the proportion of tensile cracks decreases, while shear cracks become more prevalent. …”

Impact of sludge dosage on HPST. by Peng Zhao (128233)

“…This paper was to study the optimal conditions of HPST, first, some single-factor tests were conducted to preliminarily explore the optimal range of influencing factors, and then response surface methodology (RSM) tests were performed to accurately determine the optimums of significant factors.The results showed that adding sludge can not improve the water quality of coagulation treatment, but it can significantly accelerate the coagulation settlement process, the sludge dosage, the coagulant dosage and sewage pH all impacted significantly on its coagulation effect, and existed inflection points. …”

Impact of settling time on HPST. by Peng Zhao (128233)

“…This paper was to study the optimal conditions of HPST, first, some single-factor tests were conducted to preliminarily explore the optimal range of influencing factors, and then response surface methodology (RSM) tests were performed to accurately determine the optimums of significant factors.The results showed that adding sludge can not improve the water quality of coagulation treatment, but it can significantly accelerate the coagulation settlement process, the sludge dosage, the coagulant dosage and sewage pH all impacted significantly on its coagulation effect, and existed inflection points. …”

ANOVAs for the response surface of Eq (2). by Peng Zhao (128233)

“…This paper was to study the optimal conditions of HPST, first, some single-factor tests were conducted to preliminarily explore the optimal range of influencing factors, and then response surface methodology (RSM) tests were performed to accurately determine the optimums of significant factors.The results showed that adding sludge can not improve the water quality of coagulation treatment, but it can significantly accelerate the coagulation settlement process, the sludge dosage, the coagulant dosage and sewage pH all impacted significantly on its coagulation effect, and existed inflection points. …”

Impact of CPAM dosage on HPST. by Peng Zhao (128233)

“…This paper was to study the optimal conditions of HPST, first, some single-factor tests were conducted to preliminarily explore the optimal range of influencing factors, and then response surface methodology (RSM) tests were performed to accurately determine the optimums of significant factors.The results showed that adding sludge can not improve the water quality of coagulation treatment, but it can significantly accelerate the coagulation settlement process, the sludge dosage, the coagulant dosage and sewage pH all impacted significantly on its coagulation effect, and existed inflection points. …”