Training History: The x-axis represents the number of epochs, and the y-axis represents the L2 error for the four selected data points. by Mouad Klai (20818364)

Point cloud fusion instance effect. by Hongliang Zou (20707270)

Subjects:

Patellar 3D-MRI before and after OWHTO in all cases. by Yusuke Fuchioka (22806178)

3-D printed NGV specimen. by Decang Lou (21439960)

“…The results reveal that the large deviation in the manufactured vane (up to 0.5 mm at the leading edge) alters the direction of the coolant flowing out from the leading-edge film-cooling holes, affects the film coverage along the surface, and in consequence, causes the temperature near the stagnation point increasing by approximately 40 K. Furthermore, variations in coolant inlet pressure, decreasing by 10 kPa, and temperature, increasing by 10 K, result in the vane surface temperature increased by 20 ~ 30 K. …”

Data Sheet 1_An autonomous navigation method for orchard mobile robots based on octree 3D point cloud optimization.docx by Hailong Li (216327)

“…However, the increased richness of information provided by 3D LiDAR also leads to a higher computational burden for point cloud data processing, posing challenges to real-time navigation. …”

The result of the deviation of the angle axis between the RD and the three-dimensional point cloud coordinates during the actual movement process. by Hongliang Zou (20707270)

Subjects:

Femoral trochlear 3D-MRI before and after OWHTO in all cases. by Yusuke Fuchioka (22806178)

Comparison of different spatializations for the 3D model. by Zakaria Belghali (22581967)

Schematic diagram of monitoring points and units. by Jie Zhao (49409)

Model monitoring points and units coordinates. by Jie Zhao (49409)

Distribution of the number of proteins identified per sampling point. by Joannes Adrianus Antonius Dekker (22110261)

3D model and section view of E3 NGV. by Decang Lou (21439960)

“…The results reveal that the large deviation in the manufactured vane (up to 0.5 mm at the leading edge) alters the direction of the coolant flowing out from the leading-edge film-cooling holes, affects the film coverage along the surface, and in consequence, causes the temperature near the stagnation point increasing by approximately 40 K. Furthermore, variations in coolant inlet pressure, decreasing by 10 kPa, and temperature, increasing by 10 K, result in the vane surface temperature increased by 20 ~ 30 K. …”

Combined 3D-MRI showing the patellar cartilage superimposed on the femoral trochlear cartilage before and after OWHTO in all cases. by Yusuke Fuchioka (22806178)

The impact of the interaction between PAC and CPAM dosage on sewage turbidity. (a) Contour diagram; (b) 3D surface diagram. by Peng Zhao (128233)

Table 1_Subjective spatial orientation discomfort is associated with decreased real-world spatial performance and lower cognitive function.docx by Johannes Gerb (10287758)

Positioning errors of different algorithms on the a multi-modal and multi-scenario dataset for ground robots dataset. by Hongliang Zou (20707270)

Subjects:

Positioning trajectories and pose truths of different simultaneous localization and mapping algorithms under Sequence 1. by Hongliang Zou (20707270)

Subjects:

Schematic diagram of time stamp synchronization between LIDAR and camera in a multi-sensor system. by Hongliang Zou (20707270)

Subjects:

Comparison results of error between indoor running path and theoretical path of the robot dog. by Hongliang Zou (20707270)

Subjects:

System architecture for localization and scene reconstruction methods in autonomous navigation of RD based on multi-sensor multi-level fusion. by Hongliang Zou (20707270)

Subjects: