Modelangelo
A PC-based, CAD-driven, 5-axis rapid prototyping (RP) robotic system that uses subtractive technology is presented. ModelAngelo, as it is called, consists of six integrated hardware and software subsystems. The system utilizes a virtual 3D CAD model to produce a set of commands used to control a 5-a...
Saved in:
| Main Author: | |
|---|---|
| Other Authors: | , , |
| Format: | article |
| Published: |
2005
|
| Online Access: | http://hdl.handle.net/10725/4599 http://dx.doi.org/10.1016/j.rcim.2004.06.004 http://libraries.lau.edu.lb/research/laur/terms-of-use/articles.php http://www.sciencedirect.com/science/article/pii/S0736584504000729 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | A PC-based, CAD-driven, 5-axis rapid prototyping (RP) robotic system that uses subtractive technology is presented. ModelAngelo, as it is called, consists of six integrated hardware and software subsystems. The system utilizes a virtual 3D CAD model to produce a set of commands used to control a 5-axis robotic setup to move the cutting tool, the tip of which is a heated wire, into a workpiece block (polystyrene foam or wax) to form complex-shaped objects. The user provides a 3D CAD model of the object to be sculpted. ModelAngeloSoftware generates layered contoured slices at predetermined incremental steps. It builds up a data file that contains the corresponding cutting tool radial, angular, elevation and rotational positions of the modeled work. Then ModelAngeloPortMessenger feeds the computer parallel port with consecutive commands that are read by ModelAngeloController. Consequently, ModelAngeloReadNFeed performs the commands and sends feedback signals to the processor. The actuators then place the tool tip and the workpiece in their respective cutting positions via ModelAngeloMechanisms, which puts the model and the tip tool in the cutting position, where ModelAngeloTipTool cutting-by-heat role starts. |
|---|